A 10Kw LiFeP04 battery bank

Robaroni · 11-30-19, 04:41 PM

Thanks Daox!
I haven't posted in awhile, been busy with projects but I thought you guys would like to see what I've been up too.

I'm using two Outback GFX3648 inverters for a total of 7.2Kw with a Flex80 and a Flex60 charge controller.

The project took about 2 mos. to complete but I saved thousands of dollars so I think it was worth it.
Next I hope (finally!) to get to wind and microhydro but I needed to put them aside as I had no backup during power failures, my L/A batteries were shot.
Rob

11-30-19, 04:41 PM	#3
Robaroni Journeyman EcoRenovator Join Date: Jun 2013 Location: Delhi, NY Posts: 332 Thanks: 20 Thanked 53 Times in 40 Posts	Thanks Daox! I haven't posted in awhile, been busy with projects but I thought you guys would like to see what I've been up too. I'm using two Outback GFX3648 inverters for a total of 7.2Kw with a Flex80 and a Flex60 charge controller. The project took about 2 mos. to complete but I saved thousands of dollars so I think it was worth it. Next I hope (finally!) to get to wind and microhydro but I needed to put them aside as I had no backup during power failures, my L/A batteries were shot. Rob