03-14-17, 09:22 PM | #1 |
Super Moderator
Join Date: Jun 2013
Location: SC
Posts: 2,923
Thanks: 172
Thanked 564 Times in 463 Posts
|
I repaired my Insteon Serial Modem Interface.
This is how my home automation talks to my house lighting. The power supply goes bad in them.
So I bought about $2 in parts and fixed it as other before me have. I used better caps they are higher temp. They think the get to hot and go bad. Sure saves paying 80 + shipping for a new one. Here is the post. Repair of 2413S PLM When the Power Supply Fails - Smarthome Channel - Universal Devices Forum This setup runs my hot water recirculation pump. When you turn on a light close to water. Like a bathroom light it will run the pump for a certain amount of time. So when you get to the sink it is warm. This was bad for a day before I fixed it man you don’t realize how much you like this feature until it is gone for a day. I am very glad it is back.
__________________
Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
|
|