|
Advanced Search |
|
Thread Tools | Display Modes |
|
07-31-11, 12:17 PM | #1 |
Apprentice EcoRenovator
Join Date: Aug 2010
Location: Lakehills, Tx
Posts: 168
Thanks: 4
Thanked 10 Times in 9 Posts
|
I'm curious on how you painted the pex.
|
07-31-11, 02:47 PM | #2 |
Helper EcoRenovator
Join Date: Jul 2011
Location: Far northern FLorida
Posts: 43
Thanks: 0
Thanked 9 Times in 7 Posts
|
I set in exact position the Pex Coil within the Box , angled the Box at the desired 30 degrees from vertical ... then painted the coils on the top and sides (and the bottom as much as i could by slightly moving the coils around) : I waited for the paint to dry then did it 2 more times until i had good coverage . I used Krylon Fusion plastic paint which the Mfg'r told me is good for 200 f. The paint finish hasnt dulled in the least after a few days of operation with the outdoor temp. being 95 f. in full sun.
|
|
|