EcoRenovator  

Go Back   EcoRenovator > Improvements > Geothermal & Heat Pumps
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 08-26-14, 05:07 PM   #11
mejunkhound
Apprentice EcoRenovator
 
Join Date: Apr 2011
Location: PNW
Posts: 196
Thanks: 0
Thanked 47 Times in 31 Posts
Default

Quote:
Originally Posted by NiHaoMike View Post

Great solutions. Keep up the good DIY ideas!!!!

Solution 1 - Replace the compressor and TXV with smaller ones. Expensive in parts even if you buy surplus, also very labor intensive.


Solution 4 - Add a VFD. Not cheap if you have to buy the VFD new, but very economical if you can get a surplus VFD. Relatively low labor cost and doesn't even need an EPA certification. Also get the benefits of a variable speed system. The high tech naysayers don't like this solution, but why listen to them?

#1 is great idea if you need to replace a failed compressor. Big side benefit besides higher COP is that in HP mode the evaporator does not freeze up. Did this for own house.

#4 Beats even #1 if you have a 3 phase compressor - I replaced my failed compressor with a single phase compressor as that was what I had on hand, would have used the VFD approach with a 3 phase compressor if I'da had one on hand or could have found one at a low price.

BTW - I would try to find the cheapest CHINESE VFD that I could <G>

mejunkhound is offline   Reply With Quote
The Following User Says Thank You to mejunkhound For This Useful Post:
buffalobillpatrick (01-13-15)
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design