Where to install your new mini-split?? - Page 6

brogsie · 01-22-14, 04:23 PM

My house has 16" overhangs. The mini is under the overhang and does not get clogged by the snow. Rich I thought you built a roof over your mini. I left my fujitsu running all night. It was set at 66 but could only keep the house at 65. Usually when set to 66 it will keep the house 68-69. See how it does tonight supposed to be -1. Turned the water heater to all resistance. Basement was down to 47.

Xringer · 01-22-14, 04:52 PM

My basement has been staying right at 50F, thanks to all the oil we've been burning.

I've been outside during a snow storm and watched one of my units pulling in the snow. I could see it slowly build up.
I do have a pretty good roof over one unit, but the other only has a very small make-shift rain roof.
http://i46.photobucket.com/albums/f1...CL/Sanyo-1.jpg
It's just to keep water from dripping down from the side of the house and running
down in front of the HX coil.
http://i46.photobucket.com/albums/f1...0slot/R072.jpg

The temperature has started to drop, by midnight the forecast shows us in the low single digits.
I'll be shutting down the Sanyos at around 8F, which might be pretty quick.

I don't like leaving them on during very low temps, after they start using 2Kw.
Better to shut them off, and get the same heat from 2kW in space heaters.

When I see a forecast with less than 10F for early in the morning,
I can set my Sanyos to turn off, 1/2 hour after the oil burner comes on.

The oil burner timer was installed before we started using the A7 for hotwater.
I've done one timer setup run, and it worked like a charm.

01-22-14, 04:52 PM	#52
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	My basement has been staying right at 50F, thanks to all the oil we've been burning. I've been outside during a snow storm and watched one of my units pulling in the snow. I could see it slowly build up. I do have a pretty good roof over one unit, but the other only has a very small make-shift rain roof. http://i46.photobucket.com/albums/f1...CL/Sanyo-1.jpg It's just to keep water from dripping down from the side of the house and running down in front of the HX coil. http://i46.photobucket.com/albums/f1...0slot/R072.jpg The temperature has started to drop, by midnight the forecast shows us in the low single digits. I'll be shutting down the Sanyos at around 8F, which might be pretty quick. I don't like leaving them on during very low temps, after they start using 2Kw. Better to shut them off, and get the same heat from 2kW in space heaters. When I see a forecast with less than 10F for early in the morning, I can set my Sanyos to turn off, 1/2 hour after the oil burner comes on. The oil burner timer was installed before we started using the A7 for hotwater. I've done one timer setup run, and it worked like a charm. __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. Last edited by Xringer; 01-22-14 at 05:07 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-22-14, 04:23 PM	#51
brogsie Helper EcoRenovator Join Date: Oct 2013 Location: mass Posts: 51 Thanks: 26 Thanked 3 Times in 2 Posts	My house has 16" overhangs. The mini is under the overhang and does not get clogged by the snow. Rich I thought you built a roof over your mini. I left my fujitsu running all night. It was set at 66 but could only keep the house at 65. Usually when set to 66 it will keep the house 68-69. See how it does tonight supposed to be -1. Turned the water heater to all resistance. Basement was down to 47.