01-15-20, 11:38 AM | #1 |
Lurking Renovator
Join Date: Dec 2009
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
woter to water heat exchanger question
Hi
I have been watching for a while. I am thinking of making a heat exchanger. I would like to start small and move on from there. I would like to heat my 3 ft crawl space. approx 600 square feet. our house is on an aluvial fan with high water table and natural flow down hill. I am wondering what is the lowest temp that would be reasonable for this to work. I plan on digging a hole and placing a thermometer in the water. I can place pipes uphill and use it as a horizontal well to provide a water source. my theory is to direct the water from an up hill source to a storage unit with 2 inch pipe.(approx 150 ft run) build the heat exchanger to use the storage as a source. this way I could control sediment in the supply. It appears to me the most importent thing is to know if the water has enough temp to work. any info is appreciated |
01-15-20, 08:08 PM | #2 |
Supreme EcoRenovator
|
Welcome to the forums! Start a thread about it in the heat pump section. Tons of details to clarify and goals to identify in order to ensure success.
|
|
|