EcoRenovator  

Go Back   EcoRenovator > Improvements > Renovations & New Construction
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 05-08-15, 03:43 PM   #21
rvCharlie
Lurking Renovator
 
Join Date: Jul 2013
Location: central MS
Posts: 23
Thanks: 2
Thanked 3 Times in 3 Posts
Default

Quote:
Originally Posted by dablack View Post
Charlie,

That sounds really cool! I like that! I would love to see pictures if you have any.

thanks
Austin
I don't think I have any pics of the house (might have been pre-digital era...), but here are a couple of shots of a door into my workroom and looking into a lean-to added to the side of my hangar. I used landscape timbers (cheap, & usually stay straight because they're the core of a tree after they peal it for plywood plys) for the vertical framing of the doors and the small (20x20) work space inside the larger hangar. The lean-to addition uses 3x9 C-channel purlins as rafters, on heavy 'joist hangars' on the eaves of the hangar & screwed to 4x4's on the new eave, with the door cores as decking, galvalume on top.

Hope the pics upload ok; I've never tried to post pics.




Attached Thumbnails
Click image for larger version

Name:	hangar door-roof.jpg.jpg
Views:	1564
Size:	179.4 KB
ID:	5230   Click image for larger version

Name:	shop door.jpg.jpg
Views:	1270
Size:	204.4 KB
ID:	5231  

Last edited by Daox; 05-12-15 at 09:27 AM..
rvCharlie is offline   Reply With Quote
Old 05-12-15, 08:24 AM   #22
dablack
Helper EcoRenovator
 
Join Date: Jan 2010
Posts: 65
Thanks: 0
Thanked 13 Times in 6 Posts
Default

Here is a shot of how the attic looks now. On the left is the pex manifold, then water heater, and finally 2.5 ton heat pump. This AC is supposed to be only for the upstairs. We won't be able to install a downstairs AC this year. We aren't living in the house yet but the wife is already putting stuff in the attic and I'm in there every afternoon working. That 2.5 ton heat pump is keeping the whole house at 70F with ease. With the attic, that is 2750 sqft. We have already had a 85F day here and it wasn't a problem. I think this summer will be fine too.

I'm also attaching a kitchen shot because I really like our kitchen.



Attached Thumbnails
Click image for larger version

Name:	attic.jpg
Views:	1517
Size:	439.2 KB
ID:	5250   Click image for larger version

Name:	island 2.jpg
Views:	1244
Size:	191.3 KB
ID:	5251  

Last edited by Daox; 05-12-15 at 09:27 AM..
dablack is offline   Reply With Quote
Old 07-29-15, 10:08 AM   #23
dablack
Helper EcoRenovator
 
Join Date: Jan 2010
Posts: 65
Thanks: 0
Thanked 13 Times in 6 Posts
Default

Been a while since I updated. We have been in the house for a couple of months and things are going great. We haven't had to have AC downstairs and it has been 100F (or very close) every afternoon for a couple of weeks now. I did put in a ceiling fan above the living room. On high, it really moves the air and keeps us more than cool. We do tend to chill the house at night so it will stay cool during the day.

I still haven't put the rigid foam up outside. It is so hot right now, the foam and siding will wait until late fall. I have plenty to do finishing the master bathroom and painting the kitchen.

Also, I have found multiple air leaks where the spray foam didn't get. I've been going around fixing those as I find them. One of my buddies at work has a good thermal camera so I'm going to borrow that and see if I can find anything else. We gotta keep that cold air inside!

thanks
Austin
dablack is offline   Reply With Quote
Old 07-29-15, 12:43 PM   #24
Elcam84
Apprentice EcoRenovator
 
Join Date: Jun 2013
Location: TX
Posts: 275
Thanks: 2
Thanked 31 Times in 24 Posts
Default

Nice looking attic dablack. I assume that's a temporary breaker panel being in the attic and quite far from an exterior wall.
Elcam84 is offline   Reply With Quote
Old 07-30-15, 01:14 PM   #25
dablack
Helper EcoRenovator
 
Join Date: Jan 2010
Posts: 65
Thanks: 0
Thanked 13 Times in 6 Posts
Default

Quote:
Originally Posted by Elcam84 View Post
Nice looking attic dablack. I assume that's a temporary breaker panel being in the attic and quite far from an exterior wall.
HA! I guess it is a breaker panel of sorts.....

That is for water, not electricity. It is a pex manifold. It has individual valves for all the different lines. Hot and cold water comes in and then goes out the individual lines to the shower, sinks, etc.

I designed the house so the two bathrooms were back to back and they were also right above the kitchen. This really simplified the plumbing to a very limited part of the house. So, from the south west corner of the house, I have one water line come in and go up to the water heater in the attic. From the water heater, it goes to the pex manifold about 2' away. Then the hot and/or cold water is run to the individual uses with the pex line. Basically, it didn't take long at all to plumb the supply side of this house. I bought 250' of red pex and 250' of blue pex. I still have tons of it left.

In a similar fashion, I have the actual breaker box in the very middle of the north wall. With large 2' tall floor trusses between the floor, running all the electricity didn't take long either. It is a huge house and I used way less than the average wire use to wire the place. A little thought goes a long way.

have a good one,
Austin
dablack is offline   Reply With Quote
Old 07-30-15, 01:22 PM   #26
dablack
Helper EcoRenovator
 
Join Date: Jan 2010
Posts: 65
Thanks: 0
Thanked 13 Times in 6 Posts
Default

Here is the actual breaker box.

Attached Thumbnails
Click image for larger version

Name:	breakerbox.jpg
Views:	1678
Size:	194.1 KB
ID:	5688  

Last edited by Daox; 07-30-15 at 03:06 PM..
dablack is offline   Reply With Quote
Old 09-10-15, 07:46 AM   #27
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

It sounds like things are going very well. Any other updates?
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 09-11-15, 08:30 PM   #28
dablack
Helper EcoRenovator
 
Join Date: Jan 2010
Posts: 65
Thanks: 0
Thanked 13 Times in 6 Posts
Default

Sure, I've got some updates. I used a thermal camera and found some leaks in my foam. I will post pictures on Monday. The camera was from work so all the pictures are on my work laptop.

Austin
dablack is offline   Reply With Quote
The Following User Says Thank You to dablack For This Useful Post:
Daox (09-14-15)
Old 09-14-15, 10:38 AM   #29
dablack
Helper EcoRenovator
 
Join Date: Jan 2010
Posts: 65
Thanks: 0
Thanked 13 Times in 6 Posts
Default

Ok, first two pictures for showing how the FLIR thermal camera works. Here is the pex manifold. You can see the hot water line and that we had the shower and something else going at the same time.

The rest of the pictures are where I found then spots in the spray foam or areas that were leaks due to framing. One of the attic trusses is doubles up because it is a stair area. There was a little space between the two trusses was creating a hot spot. Spraying some foam in between the trusses, into the gap fixed it.

I found lots of spots along the floor of the 2nd floor. These areas were foamed or caulked as best as possible.

Once the exterior rigid foam goes up, most of these problems will be mitigated, but I wanted to fix them as best as I can now, while they are easy to spot with the camera.

Austin



















Attached Thumbnails
Click image for larger version

Name:	047.JPG
Views:	1075
Size:	253.1 KB
ID:	5861   Click image for larger version

Name:	047 T.jpg
Views:	875
Size:	41.8 KB
ID:	5862   Click image for larger version

Name:	043.jpg
Views:	1031
Size:	507.6 KB
ID:	5863   Click image for larger version

Name:	043 T.jpg
Views:	815
Size:	36.7 KB
ID:	5864   Click image for larger version

Name:	041.jpg
Views:	898
Size:	506.5 KB
ID:	5865  

Click image for larger version

Name:	041 T.jpg
Views:	789
Size:	35.9 KB
ID:	5866   Click image for larger version

Name:	039.JPG
Views:	1030
Size:	208.0 KB
ID:	5867   Click image for larger version

Name:	039 T.jpg
Views:	780
Size:	36.5 KB
ID:	5868   Click image for larger version

Name:	033.JPG
Views:	967
Size:	204.3 KB
ID:	5869   Click image for larger version

Name:	033 T.jpg
Views:	809
Size:	38.1 KB
ID:	5870  


Last edited by Daox; 09-14-15 at 02:07 PM..
dablack is offline   Reply With Quote
The Following 7 Users Say Thank You to dablack For This Useful Post:
creeky (01-19-16), Daox (09-14-15), gtojohn (09-18-15), jeff5may (09-15-15), pinballlooking (09-15-15), Roostre (10-18-15), stevehull (09-14-15)
Old 09-15-15, 08:59 AM   #30
jeff5may
Supreme EcoRenovator
 
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,428
Thanks: 431
Thanked 619 Times in 517 Posts
Send a message via Yahoo to jeff5may
Default

The flir camera approach makes the job of getting that last little bit taken care of much easier. Those photos are very revealing. What model did you use to shoot these pics? It looks like it did its job very well.

jeff5may is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design