I am going to build a vacuum plate lifter.

pinballlooking · 04-29-21, 02:24 PM

I have lifting magnets but under ¼ plate they can be so so.
If I cut aluminum, the magnets will do nothing. Lifting 1/8 and under the magnets really do not work. Under 1/8” you can man handle.
It will be based off a YouTube video I saw.

https://www.youtube.com/watch?v=ajAQiApgRPg

I have almost everything on order to build it. I will have a remote control so you can run it from the forklift. Similar to what he did.

I just looked at a couple commercial units and they had some good ideas I will use.
I will put in switches at the pumps incase I want to lift a 1/2 sheet.
They made the arms adjustable for smaller sheets. This may make since for us.

I only lift 4'x 8' sheets Mine will have 6 8" suction cups. They can lift 180 pounds each.

Daox · 05-01-21, 09:40 AM

Sounds like a fun project.

pinballlooking · 05-01-21, 10:37 AM

I have wanted to make one, but I need a forklift to use it. I think my forklift is about 2- 2½ weeks away from being delivered.

05-01-21, 09:40 AM	#2
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	Sounds like a fun project. __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-01-21, 10:37 AM	#3
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I have wanted to make one, but I need a forklift to use it. I think my forklift is about 2- 2½ weeks away from being delivered. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.