EcoRenovator  

Go Back   EcoRenovator > Improvements > Solar Power
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-28-20, 03:48 AM   #1
Barrowman
Lurking Renovator
 
Join Date: Oct 2020
Location: North Lincolnshire, England
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default Using my panels without the grid

Hi everyone just found this site and hope I can get something sorted out.
I have 16 panels which are wired as 2 sets of 8. I assume their output is at 192 volts.
The system is a grid tied one here in the U.K.
What I am wondering is if I can use the panels unmodified on their own off grid.
It's a 4Kw system.
If I fed one set to a PC power supply and the other to a separate PC power supply I am thinking I could wire one 12 volt output from one with a 5 volt output from the other so I could charge some batteries,
I know it would only give around 10 amps at 17 volts but that would be better than nothing and I think it might be possible to develop a more powerful system based on this.
Do you see any problems with trying this?
I am assuming that the output voltage from the panels would not rise much so as to cause any problems for the PSU input.
Forget this I didn't realise this had a transformer input and wasn't what I thought.


Last edited by Barrowman; 10-29-20 at 03:47 AM..
Barrowman is offline   Reply With Quote
 


Tags
charger, computer, off gird, solar

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design