EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 11-09-16, 10:14 AM   #1
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default Tankless water heater maintaince

So I got my tankless water heater today.
And figured I will break from tradition and read the manual before I install it.
It looks like in the manual they highly recommend adding provisions to hook up an external pump so that vinegar or citric acid solution can be circulated through the heat exchanger to remove scale build up.
The manual makes this maintaince sound pretty important.

This isn't a problem for me I have extra brand new 3/4 inch valves I bought from the scrap yard for maybe $1 each and I have a pump that can circulate the recommend volume (2 to 4 gpm).

The tankless heaters are not as maintaince free as I thought.

If you want low to no maintenance get an electric tank heater and put a magnesium anode in it.

oil pan 4 is offline   Reply With Quote
Old 11-09-16, 11:47 AM   #2
pinballlooking
Super Moderator
 
pinballlooking's Avatar
 
Join Date: Jun 2013
Location: SC
Posts: 2,923
Thanks: 172
Thanked 564 Times in 463 Posts
Default

Annual maintenance depending on how hard your water is.
http://www.noritz.com/blog/biggest-m...-water-heater/

I was lucky and got a free isolation valve set. Here is a good price on a set with free shipping
https://www.build.com/takagi-9007605...g!188197043119!
__________________
Current project Aquaponics system , Passive Solar Greenhouse build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Solar Install 12.5 Kwh-
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Mini Split installs -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

EV Chevy Volt -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
pinballlooking is offline   Reply With Quote
Old 11-09-16, 01:00 PM   #3
stevehull
Steve Hull
 
Join Date: Dec 2012
Location: hilly, tree covered Arcadia, OK USA
Posts: 826
Thanks: 241
Thanked 165 Times in 123 Posts
Default

On either side of the heat exchanger, I put on a set of "t" fittings that stub out to gate valves. In the 29 years I have used this, I have not had to run acid through it. And I have moderately hard water. The exchanger is a cupronickel type that expands and contracts with each use. This largely eliminates development of hard water scale.

But if I had not put on those fittings/values, then it would have plugged up with scale quickly . . . ! Ha - the perversity of life . . ..

The pump can simply be an inexpensive "Little Giant" type, and then a couple lengths of old garden hose and a plastic bucket for the vinegar.

No biggie.

I really like the tankless system.


Steve
__________________
consulting on geothermal heating/cooling & rational energy use since 1990
stevehull is offline   Reply With Quote
Old 11-09-16, 03:06 PM   #4
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

I was just going to cobble together my own valve isolation. I have about a dozen 3/4 and 1/2 inch valves in my plumbing collection.
oil pan 4 is offline   Reply With Quote
Old 11-09-16, 03:10 PM   #5
pinballlooking
Super Moderator
 
pinballlooking's Avatar
 
Join Date: Jun 2013
Location: SC
Posts: 2,923
Thanks: 172
Thanked 564 Times in 463 Posts
Default

They both work the same way. If I did not get mine for free I might have made my own isolation valves. I was just pointing out what I used.
__________________
Current project Aquaponics system , Passive Solar Greenhouse build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Solar Install 12.5 Kwh-
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Mini Split installs -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

EV Chevy Volt -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
pinballlooking is offline   Reply With Quote
Old 11-09-16, 05:39 PM   #6
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

I am also considering a hot water circulating pump if the flow will kick on the burner.
oil pan 4 is offline   Reply With Quote
Old 11-09-16, 08:53 PM   #7
pinballlooking
Super Moderator
 
pinballlooking's Avatar
 
Join Date: Jun 2013
Location: SC
Posts: 2,923
Thanks: 172
Thanked 564 Times in 463 Posts
Default

I don’t know what unit you ended up with. Most units will turn on at different flow rates.
Mine kicks on at a fairly low flow rate. I use a circulating pump that gets turned on with the light switch in the bathrooms and the kitchen sink. I run it different amounts of time depending how far away from the unit.
What unit did you buy?
__________________
Current project Aquaponics system , Passive Solar Greenhouse build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Solar Install 12.5 Kwh-
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Mini Split installs -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

EV Chevy Volt -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
pinballlooking is offline   Reply With Quote
Old 11-09-16, 10:23 PM   #8
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Oops I never did give make and model number.
It's a "Marey" model GA16NGETL
This is a smaller unit, at 4.3gpm water heating capacity this one is not really intended to be a whole home unit.
It can use the existing gas system and with 3 inch intake and exhaust requirement it will work fine with the existing 3 inch exhaust and 4 inch abandoned wall heater exhaust vent in my house.

Whole home units ate typically 7.5gpm. And they need large 5 inch intake and exhaust ducts. Existing exhaust vents are likely 3 or 4 inch Then the existing 1/2 inch 0.4psi gas line systems in most homes may not be able to provide enough gas.
oil pan 4 is offline   Reply With Quote
Old 11-10-16, 07:57 AM   #9
pinballlooking
Super Moderator
 
pinballlooking's Avatar
 
Join Date: Jun 2013
Location: SC
Posts: 2,923
Thanks: 172
Thanked 564 Times in 463 Posts
Default

Your unit.
Activation Flow Rate: 0.66 GPM
Applicable Water Pressure: 1.45 PSI - 138 PSI (0.1 - 9.5 bar)
With these specs it should kick on with a circulating pump
__________________
Current project Aquaponics system , Passive Solar Greenhouse build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Solar Install 12.5 Kwh-
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Mini Split installs -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

EV Chevy Volt -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
pinballlooking is offline   Reply With Quote
The Following 2 Users Say Thank You to pinballlooking For This Useful Post:
Daox (11-27-17), oil pan 4 (11-10-16)
Old 11-10-16, 08:14 AM   #10
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Thanks, I was looking for that in the manual but wasn't finding it.

oil pan 4 is offline   Reply With Quote
Reply


Tags
hot water, maintenance, tankless heater, water heater

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design