EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 01-08-12, 07:48 PM   #1
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default Does bubble-wrap work for insulating windows?

Does bubble-wrap work for insulating windows?

For $15, I bought a roll of 24" wide roll of bubble wrap, enough for three or four windows (I only wanted to do the lower windows).


On a single glass window with no storm window, it makes a big difference!

I also tried it on single-glass with storm and next on Argon-filled double low-E windows, on each one , the difference was less than the previous test. The difference on double-glass, Argon-filled double low-E window was almost too low to read.

Take-away:
  • If you have single-glass windows, bubble-wrap can certainly help. At $15 for several windows, it is tremendous bang for the buck.
  • If you have single-glass with storms it will help a little.
  • If you spent $300 on Argon filled double low-E, don't bother to invest $15 to cover your Argon-filled windows with bubble wrap.

-AC_Hacker

Attached Thumbnails
Click image for larger version

Name:	bubble-wrap.jpg
Views:	34161
Size:	53.4 KB
ID:	2012  
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...

Last edited by AC_Hacker; 01-09-12 at 09:07 PM..
AC_Hacker is offline   Reply With Quote
The Following 7 Users Say Thank You to AC_Hacker For This Useful Post:
Daox (01-09-12), Exeric (01-17-13), philb (01-09-12), Quest (01-09-12), razor02097 (12-03-13), S-F (01-10-12), TimJFowler (01-11-12)
Old 01-08-12, 08:40 PM   #2
iamgeo
Apprentice EcoRenovator
 
Join Date: Aug 2010
Location: Lakehills, Tx
Posts: 168
Thanks: 4
Thanked 10 Times in 9 Posts
Default

From everything I have read it works very well.
I would suggest asking friends and/or going to most any store and getting the wrap for free.
To clarify that last line.
Ask for the wrap they received in packages sent to them.
iamgeo is offline   Reply With Quote
Old 01-09-12, 07:21 PM   #3
GaryGary
Apprentice EcoRenovator
 
Join Date: Nov 2008
Location: SW Montana
Posts: 139
Thanks: 1
Thanked 21 Times in 15 Posts
Default

Hi AC,
I had a go at measuring the performance of bubble wrap on our double glazed low e windows back in 2005:
BubbleWrapPerformance

The results looked pretty good -- better than I would have expected by just saying the the bubble wrap adds about R1 to what is already there. Not sure if this is a flaw in the technique I used, or just that the bubble wrap did a bit better than expected.

Based on the double glazed low-e having an R value of about 3 (U of 0.33) and the bubble wrap adding R1, you would expect about a 25% drop in heat loss by adding the bubble wrap.
But, the measurements I took came out at about a 45% reduction in heat loss.

Anyone have a better way of measuring the actual performance?
I now have an IR thermal camera, which would make getting overall window temps easier.
It would be nice to know what the real number is.

Gary
GaryGary is offline   Reply With Quote
Old 01-09-12, 10:00 PM   #4
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Quote:
Originally Posted by GaryGary View Post
Based on the double glazed low-e having an R value of about 3 (U of 0.33) and the bubble wrap adding R1, you would expect about a 25% drop in heat loss by adding the bubble wrap.
But, the measurements I took came out at about a 45% reduction in heat loss.
I could have saved myself so much trouble and expense if I hadn't put in 3 layers of 2 inch XPS in the walls (R-30 for 6"), carefully sealed at every layer.

Instead, I should have wrapped my kitchen in bubble wrap.

What a fool I was!

-AC_Hacker
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
The Following 2 Users Say Thank You to AC_Hacker For This Useful Post:
ctgottapee (12-19-13), keithstef (01-26-12)
Old 01-10-12, 03:29 PM   #5
GaryGary
Apprentice EcoRenovator
 
Join Date: Nov 2008
Location: SW Montana
Posts: 139
Thanks: 1
Thanked 21 Times in 15 Posts
Default

I think you should have just run the 6 inch R30 right over the windows

Gary
GaryGary is offline   Reply With Quote
Old 01-10-12, 03:37 PM   #6
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Quote:
Originally Posted by GaryGary View Post
I think you should have just run the 6 inch R30 right over the windows

Gary
The view was not so magnificent, anyway!

-AC_Hacker
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
Old 01-11-12, 10:04 AM   #7
MN Renovator
Less usage=Cheaper bills
 
MN Renovator's Avatar
 
Join Date: Nov 2010
Location: Minneapolis, MN
Posts: 939
Thanks: 41
Thanked 116 Times in 90 Posts
Default

Quote:
Originally Posted by GaryGary View Post
I think you should have just run the 6 inch R30 right over the windows

Gary
*Puts flame suit on* I'm actually considering this, removing the wood blinds(which are dark and pull a ton of heat in) and attaching some drapery to the insulation, gasketing the edge and shoving a 2" sheet of XPS against the glass on the inside. Granted it isn't the outside but its also going to be on the front of the house so I'd like it to look somewhat normal. I'm thinking blocking the light will do more than the R10 will but it should amount to a roughly R12 window assembly that kicks the crap out of the performance of low-E gas. Would this work as well as I think it would?
MN Renovator is offline   Reply With Quote
Old 01-17-13, 05:29 PM   #8
greif
a van down by the river
 
Join Date: Jun 2011
Location: Kaukauna,WI
Posts: 108
Thanks: 6
Thanked 5 Times in 5 Posts
Default

Quote:
Originally Posted by AC_Hacker View Post
I could have saved myself so much trouble and expense if I hadn't put in 3 layers of 2 inch XPS in the walls (R-30 for 6"), carefully sealed at every layer.

Instead, I should have wrapped my kitchen in bubble wrap.

What a fool I was!

-AC_Hacker
wrap the outside of the house and watch the nieghbors looks on their faces
__________________
Gary R

“If you want total security, go to prison. There you're fed, clothed, given medical care and so on. The only thing lacking... is freedom. ” ― Dwight D. Eisenhower
greif is offline   Reply With Quote
Old 01-17-13, 04:20 PM   #9
liuite
Lurking Renovator
 
Join Date: Jan 2013
Location: earth
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Too bad we can't test this idea with Argon filled bubble wrap
liuite is offline   Reply With Quote
Old 11-26-13, 12:09 PM   #10
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

I just wrote a quick blog on this because its so easy and cheap to do and I think more people should consider it.

One question I did have though. It looks like AC_Hacker used the bubble wrap with smaller bubbles while the pictures on Gary's site look like he used the bubble wrap with larger bubbles. I'm wondering if the larger bubbles would be superior to the smaller ones? It also seems like AC_Hacker used two layers of bubble wrap versus Gary just using one. Anyway, things to consider and compare.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design