EcoRenovator  

Go Back   EcoRenovator > Improvements > Lawn and Garden
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts


Reply
 
Thread Tools Display Modes
Old 09-26-20, 09:54 AM   #1
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default Gasoline powered wood chipper

Well I got the small DR chipper shreader.
The electric one works. Problem is when I cut down one smaller 15 foot tall tree it takes me at least 40 minutes to feed all the little sticks and twigs into the electric wood chipper. A big tree takes like 2 hours.
For me everything greater than 1 to 1.5 inches in diameter is fire wood so I'm not trying to mulch everything.
The smallest 6.5hp 208cc DR should be fine.

oil pan 4 is offline   Reply With Quote
Old 09-28-20, 12:55 AM   #2
u3b3rg33k
Apprentice EcoRenovator
 
Join Date: Mar 2018
Location: Rustbelt, USA
Posts: 114
Thanks: 5
Thanked 10 Times in 9 Posts
Default

Quote:
Originally Posted by oil pan 4 View Post
Well I got the small DR chipper shreader.
The electric one works. Problem is when I cut down one smaller 15 foot tall tree it takes me at least 40 minutes to feed all the little sticks and twigs into the electric wood chipper. A big tree takes like 2 hours.
For me everything greater than 1 to 1.5 inches in diameter is fire wood so I'm not trying to mulch everything.
The smallest 6.5hp 208cc DR should be fine.
DR makes good stuff, but not a big fan of the B&S engines. our chipper is the 18HP model (eats a up to 4x4s). well it was, the B&S motor wore out and it's now a 20HP Honda. nowhere near the hours on it as the kawa powered brush mower and that is still running strong.

that said for small occasional use you'll get plenty of use out of it.
u3b3rg33k is offline   Reply With Quote
Old 09-28-20, 09:00 AM   #3
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Yeah I definitely don't want to chip something 4x4. The biggest wood I would chip is rotten wood. It's light as a feather and will catch fire from the slightest spark.
If I grind those into dust they shouldn't be a fire hazard any more.
What happened to the Briggs and Stratton engine?
It seems like the wood chipper application is hell on motors.
If I kill this motor I will try to replace it with the biggest single phase AC motor I can find that will fill in all the important holes.
I'm wondering if it's a 56TC frame foot print.

I can see blades in the chipper and it looks like hammer mill hammers and a shreader blade down inside the shredder.

Last edited by oil pan 4; 09-28-20 at 08:18 PM..
oil pan 4 is offline   Reply With Quote
Old 09-29-20, 01:21 PM   #4
u3b3rg33k
Apprentice EcoRenovator
 
Join Date: Mar 2018
Location: Rustbelt, USA
Posts: 114
Thanks: 5
Thanked 10 Times in 9 Posts
Default

the B&S engine just wore out. I think it was the rings/cylinder. had it happen on the log splitter, too (also a B&S motor). mind you these things had what would amount to light commercial use for the better part of a decade. their higher end stuff has engines with real oil pumps and filters vs the splash lube of the cheap stuff.
u3b3rg33k is offline   Reply With Quote
Old 09-30-20, 12:05 AM   #5
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Yeah I have a Kohler v twin riding lawn mower from like 2008 that's had the hell beaten out of it. The Kohler engine uses an oil pump and filter.
oil pan 4 is offline   Reply With Quote
Old 10-14-20, 10:22 PM   #6
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Got a big pile of wood chips now and I'm thinking let them dry out and burn them in the coal furnace.
oil pan 4 is offline   Reply With Quote
Old 10-16-20, 09:37 PM   #7
u3b3rg33k
Apprentice EcoRenovator
 
Join Date: Mar 2018
Location: Rustbelt, USA
Posts: 114
Thanks: 5
Thanked 10 Times in 9 Posts
Default

Quote:
Originally Posted by oil pan 4 View Post
Got a big pile of wood chips now and I'm thinking let them dry out and burn them in the coal furnace.
big boy pellet stove?
u3b3rg33k is offline   Reply With Quote
Old 10-19-20, 03:02 PM   #8
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

It's just a coal furnace that you shovel coal into.
oil pan 4 is offline   Reply With Quote
Old 10-19-20, 09:25 PM   #9
u3b3rg33k
Apprentice EcoRenovator
 
Join Date: Mar 2018
Location: Rustbelt, USA
Posts: 114
Thanks: 5
Thanked 10 Times in 9 Posts
Default

well dry wood chips are basically coal-precursor lumps so same same right?
u3b3rg33k is offline   Reply With Quote
Old 10-20-20, 01:15 AM   #10
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Yeah wood just burns really fast compared to high grade coal.

oil pan 4 is offline   Reply With Quote
The Following User Says Thank You to oil pan 4 For This Useful Post:
Daox (10-20-20)
Reply


Tags
wood chipper


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design