|06-20-14, 03:19 PM||#37|
Join Date: Feb 2009
Location: Woburn, MA
Thanked 244 Times in 224 Posts
It was getting too hot in the back hall and in the low 70s in the basement.
I've unplugged the attic blower and used the X10 to power the old
attic exhaust fan (it vents to the outdoors).
That old exhaust fan has it's own thermostat (on@120F & off@100).
So it's enabled by the CAI program (via X10), but might not run.
(If it's not hot enough in the attic).
The basement fan will still run whenever it's commanded by the program.
Today isn't very hot, so only the basement blower is running.
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..