EcoRenovator  

Go Back   EcoRenovator > Improvements > Solar Heating
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 04-18-12, 11:42 AM   #1
menaus2
Apprentice EcoRenovator
 
Join Date: Feb 2011
Location: Driftless Region, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy,Virgo Supercluster
Posts: 116
Thanks: 13
Thanked 33 Times in 25 Posts
Default Pex Solar Water Preheat Project

I'm starting a drainback type solar preheat system on a rental property. I have the tank mostly built and that will be fed by a pex collector I have yet to build. Off to move the tank into the property's basement, I'll have pics up soon.

menaus2 is offline   Reply With Quote
Old 04-18-12, 09:55 PM   #2
GaryGary
Apprentice EcoRenovator
 
Join Date: Nov 2008
Location: SW Montana
Posts: 139
Thanks: 1
Thanked 21 Times in 15 Posts
Default

Hi,
You are probably aware of this already, but you want a steep tilt and only single glazing on the PEX collector to avoid stagnation temperatures getting high enough to damage the PEX.

This one is tilted at 70 degrees and still shows occasional stagnation temps as high as 230F, which is about a high as you ever want to go with PEX even in a non-pressurized system:
$1000 Solar Water Heating System -- Performance

Gary
GaryGary is offline   Reply With Quote
Old 07-04-12, 02:45 PM   #3
TheyCallMeDave
Helper EcoRenovator
 
Join Date: Jul 2011
Location: Far northern FLorida
Posts: 43
Thanks: 0
Thanked 9 Times in 7 Posts
Default

Quote:
Originally Posted by GaryGary View Post
Hi,
You are probably aware of this already, but you want a steep tilt and only single glazing on the PEX collector to avoid stagnation temperatures getting high enough to damage the PEX.

This one is tilted at 70 degrees and still shows occasional stagnation temps as high as 230F, which is about a high as you ever want to go with PEX even in a non-pressurized system:
$1000 Solar Water Heating System -- Performance

Gary
Also, blanking off part of the collector surface with a piece of shiny thicker guage sheetmetal that can be hooked on the frame and removed easily, might be a good alternative to controlling water stagnation temp.

On my Pex Collector, ive got it currently tilted way back at about a 30 degree angle from horizontal and here in Northwest Florida when the outside temp. is at 95 f. in full sun ... at 4 pm. im getting a healthy 175 f and thats just using a 300' roll of 3/4" Pex-B coiled tubing laying in a 3' square wooden box with single pane glass . At first i was concerned i might be approaching boiling temps but alas it became more manageable.
TheyCallMeDave is offline   Reply With Quote
Old 04-19-12, 04:19 PM   #4
menaus2
Apprentice EcoRenovator
 
Join Date: Feb 2011
Location: Driftless Region, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy,Virgo Supercluster
Posts: 116
Thanks: 13
Thanked 33 Times in 25 Posts
Default

Thanks for the tip Gary, I plan on mounting it vertically to get around the stagnation issue and btw I must I'm a huge fan of everything you do on builditsolar.com.
menaus2 is offline   Reply With Quote
Old 05-01-12, 01:31 PM   #5
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,471
Thanks: 1,110
Thanked 367 Times in 298 Posts
Default

Any updates on this?
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 05-06-12, 12:32 AM   #6
menaus2
Apprentice EcoRenovator
 
Join Date: Feb 2011
Location: Driftless Region, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy,Virgo Supercluster
Posts: 116
Thanks: 13
Thanked 33 Times in 25 Posts
Default

Yes! I've been busy recently but I got my pictures finally downloaded onto my computer. Right now I'm probably 75% done on the Storage tank side and I'm generally following the $1000 design on builditsolar.com. I plan on having 166 sqft of collector area that drains back into a tank roughly 3.5ft x3.5ft x3.5ft of interior storage space that yields 322 gallons of storage capacity.



I started with 3 4'x8' sheets of 3/4" treated OSB as I wanted something strong, moisture resistant and economical. I cut them into 4'x4' pieces. The sidewalls rest flush on top of the edge of the bottom sheet. The wall widths are 3'11&1/4". This allows them to but up against the next one in a "circular" fashion (you'll see in later pics).



I screwed on the top and bottom supports (from the tank inside of course ) using treated 2"x4"s I have them overlap each other for easier final reassembly. One thing in retrospect I wish I had done is to directly attach the bottom support to the base sheet as the sheet would take the outward pressure at the bottom walls better. To address this issue I simply added another layer of 2x4s to reinforce it more. Also, Torx bits are your friend



Here I glued and screwed the middle supports onto the walls. A good New Glarus Fat Squirrel beer makes things go much faster (or maybe it only seems lol ) I also used Gorrilla Glue brand woodglue, idk how much of a difference it really would make over regular woodglue, but I figured it couldn't hurt.

Last edited by menaus2; 05-06-12 at 12:34 AM.. Reason: fix picture imbedding
menaus2 is offline   Reply With Quote
Old 05-06-12, 09:03 PM   #7
menaus2
Apprentice EcoRenovator
 
Join Date: Feb 2011
Location: Driftless Region, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy,Virgo Supercluster
Posts: 116
Thanks: 13
Thanked 33 Times in 25 Posts
Default





Disassembly to put 2 coats of sealing primer on each piece.



Detail of how the base rests on 4" of XPS foamboard.



Closeup of how the corners interlock. One issue I had was that after priming, it was harder to reassemble everthing cause the pieces liked to stick together.



Final check before moving the unit. The inside looks so neat and clean after the paint job!
menaus2 is offline   Reply With Quote
Old 05-06-12, 09:22 PM   #8
menaus2
Apprentice EcoRenovator
 
Join Date: Feb 2011
Location: Driftless Region, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy,Virgo Supercluster
Posts: 116
Thanks: 13
Thanked 33 Times in 25 Posts
Default



Moving the pieces and reassembling in the apartment basement. Space was tight and had to fit in a space between 2 walls, a dryer and a basement jack. Definitely had some tetris moments.



Finally assembled!



I put nail plates to reinforce the outside supports as an extra precaution. You can also see how the interior polyiso insulation fits on the walls. I put 2" of polyiso on the floor of the tank first.



How the polyiso wall insulation is layered.
menaus2 is offline   Reply With Quote
Old 05-06-12, 09:39 PM   #9
menaus2
Apprentice EcoRenovator
 
Join Date: Feb 2011
Location: Driftless Region, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy,Virgo Supercluster
Posts: 116
Thanks: 13
Thanked 33 Times in 25 Posts
Default



Tank with insulation.



Cut the insulation flush with the top. I also made up and printed a label and a some safety warnings, laminated them in 2 layers of contact paper and stapled them up.



Fitting the liner. I used a 15'x15', 45 mil EPDM sheet. Took some finagling to get it mostly fitted.

So that's where I currently am in the project. I have to tackle the lid next and then probably the pex heat exchanger and all the necessary plumbing.
menaus2 is offline   Reply With Quote
Old 05-07-12, 09:08 AM   #10
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,471
Thanks: 1,110
Thanked 367 Times in 298 Posts
Default

Wow, 166 sqft. That sounds like it should be quite capable of providing nearly all the DHW unless there are many people in the building. What is this setup going into?

Nice work with the tank too. It looks like it JUST fits! Are you planning on adding any additional insulation on the outside?
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Reply


Tags
drainback, water heater, water tank

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design