EcoRenovator  

Go Back   EcoRenovator > Improvements > Other Improvements
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 06-14-10, 09:02 AM   #1
ThisBroHouse
Lurking Renovator
 
Join Date: Jun 2010
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Removing Painted Over Wallpaper, Exposed Dry Wall, Stubborn Glue

Hi there,

I just moved into a house that has a few rooms with painted over wallpaper that has probably been there for twenty years or longer.

In the room we wanted to tackle first, it looks like the wallpaper had been partially removed or peeled off at some point, then the patchy/ripped off wallpaper surface was painted over to try to make it look even. We tried to peel of the wall paper manually as well as with a steamer. Either way a thin layer of fuzzy paper or glue seems to remain on some of the wall. On other spots some of the drywall covering came off revealing a cardboard like texture. The steaming seemed to get a little bit of water into these exposed areas so we stopped that. It didn't do this everywhere but enough drops to make us stop.

It looks like the walls weren't primed right for the wall paper whenever the house was built (I think in the 70s). So now we have walls with large patches of this glue (or fuzzy paper), paint (on the wall itself as well as painted over wallpaper), bare drywall (I assume it's drywall it has a kind of a thin uneven, plastery finish), and small bits of exposed drywall (feels/looks like cardboard).

The goal is to get an even surface to paint over.

From what I've read I need to put a seal on the exposed bits of drywall. But after that I'm not sure what to do. Should I try to sand the glue down to make it even with the wall? Is there something I can coat the whole wall with that I can then sand? Is there another option?

I know this is going to be a long and laborious adventure. Any advice would be appreciated.

ThisBroHouse is offline   Reply With Quote
Old 06-14-10, 10:35 PM   #2
wyatt
Helper EcoRenovator
 
Join Date: Jan 2009
Posts: 75
Thanks: 3
Thanked 1 Time in 1 Post
Default

We had some 15 year old glue that we contended with... we did the steamer (what a time consuming process!), we did the picking at it with razors... but in the end what worked best was using the paper tiger to put tons of holes in the wall and using a garden sprayer to spray vinegar all over the wall. The vinegar did an awesome job! I was seriously considering getting the chemicals and going that route, but tried this first. There is still lots of work, but it is 100 times faster than the steamer (maybe a bit of an exaggeration). You will still have to fill in uneven spots with drywall compound, and sand them down. Be sure to prime two coats, then paint two coats.
wyatt is offline   Reply With Quote
Old 06-15-10, 08:07 AM   #3
ThisBroHouse
Lurking Renovator
 
Join Date: Jun 2010
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks for the advice about the vinegar and the paper tiger!
ThisBroHouse is offline   Reply With Quote
Old 06-21-10, 05:02 PM   #4
gasstingy
Journeyman EcoRenovator
 
Join Date: Feb 2010
Location: Arab, AL
Posts: 488
Thanks: 107
Thanked 47 Times in 41 Posts
Default

So, did the vinegar and paper tiger combination work. When that happened to us, the paper tiger wasn't as good (with water) as we'd hoped. I swore if I ever had to do that job over, I'd just strip the sheetrock out and replace it. Sheetrock is cheap!
gasstingy is offline   Reply With Quote
Old 09-21-12, 08:12 AM   #5
Sirius
Lurking Renovator
 
Join Date: Sep 2012
Location: Southern Califormia
Posts: 20
Thanks: 0
Thanked 2 Times in 2 Posts
Default

I had, still do in a few places, something like that, only mine was a fo (sp?) spanish style texturing. The paper tiger wouldn't touch the plaster. I even tried white vinegar. I decided I didn't want the smell in the walls. Finally I did just pull the walls down. I'm glad I did, because of all the shoddy wiring. It also gave me a chance to insulate the walls too.

Insulation isn't just for outside walls, it cuts down on the noise from room to room. I did farm out the mudding and taping. That really is an artwork to get it right and believe me, I'm no artist.

How did your reno go?

Sirius is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:26 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design