EcoRenovator  

Go Back   EcoRenovator > Improvements > Appliances & Gadgets
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 11-18-09, 05:10 PM   #21
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

I'm picturing something like this:


Insulated on one side and a flat metal (15"x11" sheet Aluminum?)
on the other side. This solar exchanger looks pretty easy to build..
Need to find out how to bond the copper tube to the sheet metal.

I was also thinking of a welded aluminum tank. 15"x11"x2"
with two 1/2" pipe fittings on one edge. Maybe some sheet metal
baffling inside to make the coolant circulate over all 165 sq inches
of the contact plate.?.

Comments please..

Xringer is offline   Reply With Quote
Old 11-18-09, 08:45 PM   #22
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
Default

Wouldn't it be better to make heat exchangers by threading copper tubing through large PEX or PVC pipe?
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Old 11-18-09, 09:14 PM   #23
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by NiHaoMike View Post
Wouldn't it be better to make heat exchangers by threading copper tubing through large PEX or PVC pipe?
It needs to fit flat against the 15"x11" hot coil of that GoldStar (LG) AC..
So, a round pipe wouldn't work.

Take a look at this little CPU cooler. (Heat exchanger).


Picture this thing made 15"x11" with the copper part epoxied to the back
end of the GoldStar AC.. (with insulation over everything).

Here's a DIY version..
Zapi Liquid Cooled Heatsink
Xringer is offline   Reply With Quote
Old 11-19-09, 09:33 AM   #24
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
Default

I remember about some overclockers cutting away part of the A/C to put the evaporator into a tank of water to make a water cooler.

Maybe do the same but with the condenser, put it in an insulated container of water and then add a coil of copper tubing as a heat exchanger?
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Old 11-19-09, 09:51 AM   #25
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by NiHaoMike View Post
I remember about some overclockers cutting away part of the A/C to put the evaporator into a tank of water to make a water cooler.

Maybe do the same but with the condenser, put it in an insulated container of water and then add a coil of copper tubing as a heat exchanger?
I saw some of those over-clockers postings last night.
And putting the condenser in a little tank was the first thing I had considered.
But, I think that a flat contact 'heat collector' mounted on the back side
of the AC might work too.
The reason: No need to remove the condenser and chance a leak.

Just remove the fan & fan motor and install insulation on the inside.
Or, install a second 'heat collector' on the inside of the condenser,
sandwiching the condenser between two heat collectors.?.
(With good insulation over the exposed areas).

The collectors could be mounted using heat conductive epoxy, or
with hardware and heat-sink compound. Something thick
that won't run down when it gets too hot.

Install a water drain hose on the bottom and use the motor AC lines to power a pump? Not a lot to the project..
Xringer is offline   Reply With Quote
Old 11-19-09, 02:56 PM   #26
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default A/C Hacks...

This all sounds like great fun!

Please remember to take loads of photos & notes when you actually do it.

One thing to keep in mind is that the A/C units are designed to use the fan air to blow past the compressor and assist cooling. Before you hack into the unit, you should let it run for a half hour or so, like maybe sitting on th floor in your basement, then turn it off, remove the cover and take a temp reading of the compressor, for future reference...

Sounds like the adventure is beginning.

Best Regards,

-AC_Hacker

P.S. BTW, I just made a related post here.

%%%%%%%
AC_Hacker is offline   Reply With Quote
Old 11-19-09, 07:36 PM   #27
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Maybe install a 120vac 4" muffin fan to keep the compressor cool?
Maybe custom build a wrap-around heat-sink for it?
Hook the heatsink up to a little heat-pipe routed from the cold-air output vent..

That related post sure was interesting reading.
Xringer is offline   Reply With Quote
Old 11-20-09, 11:35 AM   #28
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Quote:
Originally Posted by Xringer View Post
Maybe install a 120vac 4" muffin fan to keep the compressor cool?
What I'm saying is that it's a good idea to know what the original working temp of the A/C compressor is, for future refererence. You may not need the muffin fan or any auxillary cooling at all.


Quote:
Originally Posted by Xringer View Post
Maybe custom build a wrap-around heat-sink for it?
Hook the heatsink up to a little heat-pipe routed from the cold-air output vent..
Interesting ideas, but if you're gonna wrap anything around the compressor, it should be copper tubing or some kind of water jacket, going to the water storage tank. You don't want to just throw that heat away, you've already paid for it.

* * *

It has been very interesting for me to disassemble air conditioners and look at how they're made... they're made by the millions.

Part of the design criterion is efficiency, all well and good.

But another very large part is cost-reduction.This is done to expand the potential pool of buyers and of course, it also results in higher profits for the manufacturer. But sometimes the cost-reduction measure may be at the expense of efficiency. Over a production of millions of units, these decisions may be best for a company.

But for us, the Hackers & Modders of the world, the criterion is competely different. We aren't making a million units, we're just making one, or at the most a few.

Anything we can do that will increase efficiency will benefit us in the long run.

Something to think about...


-AC_Hacker

%%%%%%%
AC_Hacker is offline   Reply With Quote
Old 11-20-09, 02:58 PM   #29
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
Default

Coil a foot or two of copper tubing around the compressor, tighten it up, and slip it over the top. Then run the hot water through it after the regular heat exchanger.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Old 11-20-09, 06:47 PM   #30
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

If compressors really got that hot, it seems like the design would include at least a few heat sink fins..
But, I just took another look at the unit on my operating table and it does seem that
it's positioned near the center of a side input vent for outdoor air.
I've taken out all the screws and the front panel won't pop off.
And the rear sheet metal cover (lip) is stuck inside the unmovable plastic cover!



Mike, would not try to use the main input-output line, since the OD of that line is going
to be large. Not easy to bend stuff.

I've been eyeballing the Taco 007 pump used for the basement zone.
Taco 006 Pump, Taco 007 Pump, Taco Pumps 008, Taco Pumps 009, Taco Pump 0010, Taco Pumps 0011

The basement zone is never used in warm weather.
So if I added some taps and a cutoff, maybe I could substitute my Heat Collector for the basement zone.
I would switch out the normal relay box and use an SS relay to drive
the pump motor, using a speed control.?.

I'm thinking it might have some kind of starter capacitor under that cover.
And I'm wondering if this type of motor would work with a triac speed controller?

Xringer is offline   Reply With Quote
Reply


Tags
heat pump, hot water

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design