EcoRenovator  

Go Back   EcoRenovator > Improvements > Other Improvements
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 10-26-16, 09:28 AM   #1
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default Tips / Tricks for getting threaded pipe to seal?

I was helping out my father in law install an on demand water heater last night. The heater has 1/2" threaded pipe fittings coming out of it. So, we ran to the store and grabbed all the stuff we needed (valves, fittings, etc) and came back and installed it. We pressurized it and had a few leaks. So we removed it, tightened them up as much as we thought safe and reinstalled it. Still leaking. We used teflon tape on every joint and I'd say nearly half of them leaked. This seems ridiculous.

So, what tips do you guys have for getting threaded pipe connections not to leak?

__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 10-26-16, 10:34 AM   #2
stevehull
Steve Hull
 
Join Date: Dec 2012
Location: hilly, tree covered Arcadia, OK USA
Posts: 826
Thanks: 241
Thanked 165 Times in 123 Posts
Default

Daox,

Don't feel bad . . . .

Teflon pipe tape works great if the threads are in good shape. More recently, the quality of metal pipe threading has gone to hell.

I never had leaks, in the past, but I get them regularly now if I just use teflon tape.

I still use teflon tape on the outside threads, but now always use pipe "dope" on the inside threads. A bit more time, but NO leaks.

Hope this helps.

Steve

ps pipe dope is messy and nasty . . .
__________________
consulting on geothermal heating/cooling & rational energy use since 1990
stevehull is offline   Reply With Quote
The Following 2 Users Say Thank You to stevehull For This Useful Post:
celblazer (10-26-16), Daox (10-26-16)
Old 10-26-16, 12:02 PM   #3
sunspot
Apprentice EcoRenovator
 
Join Date: Apr 2012
Location: Vancouver Island, BC
Posts: 146
Thanks: 30
Thanked 35 Times in 29 Posts
Default

What stevehull said. I don't rely on teflon tape anymore unless it's a tiny (ie 1/8" NPT or smaller) fitting.
sunspot is offline   Reply With Quote
The Following User Says Thank You to sunspot For This Useful Post:
Daox (10-26-16)
Old 10-26-16, 09:41 PM   #4
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Thanks guys, I'll have to give that a try next time.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 10-26-16, 10:18 PM   #5
randen
Uber EcoRenovator
 
Join Date: Apr 2011
Location: Strathroy Ontario Canada
Posts: 657
Thanks: 9
Thanked 191 Times in 129 Posts
Default

For Really Really bad pipe threads I've resorted to 5 min epoxy.

Randen

Last edited by Daox; 01-13-17 at 01:16 PM..
randen is offline   Reply With Quote
The Following User Says Thank You to randen For This Useful Post:
Daox (10-27-16)
Old 10-27-16, 05:27 AM   #6
stevehull
Steve Hull
 
Join Date: Dec 2012
Location: hilly, tree covered Arcadia, OK USA
Posts: 826
Thanks: 241
Thanked 165 Times in 123 Posts
Default

Randen - I have also used silicone based caulk (the kind that cures to rubber). Will keep your suggestion of 5 minute epoxy in mind also.

I guess we have all found that threading has gotten rather bad . . . .

Steve
__________________
consulting on geothermal heating/cooling & rational energy use since 1990

Last edited by stevehull; 10-27-16 at 06:40 AM.. Reason: speling errors
stevehull is offline   Reply With Quote
Old 10-27-16, 08:11 AM   #7
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Yeah, I did notice that while threading the pieces together it was not a nice smooth process. The joints felt 'gritty' for lack of a better word and didn't engage nice and smoothly.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 01-11-17, 01:24 PM   #8
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Use hydraulic fracturing rated pipe dope. Since fracking uses preasures in excess of 9,000psi at the well head and something like 13,000 or 14,000psi at total deapth you know it will work.
I used it on my 7hp gasoline pressure washer which runs some where between 2,000 and 2,500psi on its pipe thread connections since 2008 and I don't think any have ever leaked. The only ones that leaked were the ones I used Teflon tape on.
oil pan 4 is offline   Reply With Quote
The Following User Says Thank You to oil pan 4 For This Useful Post:
Daox (01-12-17)
Old 01-12-17, 09:34 AM   #9
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Where do you get said pipe dope?
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 01-12-17, 12:57 PM   #10
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Lowes used to have it.
After I posted this I went there to get some lumber and figured I would check to see if they still have it and they do not.
It was "gasoila" rated for -100°F to +600°F and10,000psi.

But I think any 10,000psi rated pipe dope would work just as well.

oil pan 4 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design