How to Finish Drywall: 18 Steps to Smooth Joints

Daox · 09-21-10, 12:37 PM

I'm not sure how many here have done drywall work, but being a person who has only done one job I can say its a pain. Here is a decent run through of the tools and materials you'll need as well as some good step by step process and tips to help you reduce the amount of time needed to do the mud work.

What tips do you guys have?

How to Finish Drywall: 18 Steps to Smooth Joints - Popular Mechanics

tasdbois · 09-22-10, 05:52 AM

Thanks for the link!

I have my basement to finish this winter so this will come in handy.

PaleMelanesian · 09-22-10, 09:23 AM

Some things I've learned:

It's easier to sand down high spots, hard to sand down TO a low spot. If you have low spots, stop sanding and fill them first.

I do joints in about 4ft sections. Longer than that and it's hard for me to keep things smooth and keep things from drying out too much to stick.

09-21-10, 12:37 PM	#1
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	How to Finish Drywall: 18 Steps to Smooth Joints I'm not sure how many here have done drywall work, but being a person who has only done one job I can say its a pain. Here is a decent run through of the tools and materials you'll need as well as some good step by step process and tips to help you reduce the amount of time needed to do the mud work. What tips do you guys have? How to Finish Drywall: 18 Steps to Smooth Joints - Popular Mechanics __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-22-10, 05:52 AM	#2
tasdbois Lurking Renovator Join Date: Oct 2008 Location: Mirabel, QC Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for the link! I have my basement to finish this winter so this will come in handy.

09-22-10, 09:23 AM	#3
PaleMelanesian Apprentice EcoRenovator Join Date: Sep 2008 Location: Texas Posts: 118 Thanks: 4 Thanked 10 Times in 9 Posts	Some things I've learned: It's easier to sand down high spots, hard to sand down TO a low spot. If you have low spots, stop sanding and fill them first. I do joints in about 4ft sections. Longer than that and it's hard for me to keep things smooth and keep things from drying out too much to stick.