EcoRenovator  

Go Back   EcoRenovator > Improvements > Renovations & New Construction
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-06-17, 01:42 PM   #1
NeilTheCop
Helper EcoRenovator
 
Join Date: Mar 2011
Location: Roswell NM
Posts: 43
Thanks: 0
Thanked 4 Times in 4 Posts
Default Purlins?

The roof on my front porch finally gave up the ghost.
After watching the leaks get progressively worse over the years I decided to fix it. Of course in my nativity I thought, just cut out the rotted sections and re-shingle, no problem.
You guessed it, the rot was so bad that I stripped off all the roofing including the pseudo repairs that previous owners had attempted, about 40 pounds of galvanized metal and the same weight in tar sealant.
Having weighted up the cost I decided to replace it all with ribbed, not corrugated metal, now the question.
After taking off the plywood/OSB mixture that was the existing substrate I'm left with the 3/4" high gap where the sheeting used to be, to tuck the new metal under the house shingles. With only a 3/4" vertical gap and the metal roofing ribs being the same height I have no room to add the extra height of a purlin, so can the metal be attached directly to the 2X4 rafters. The 2X4's are on 16" centers and 8' in length, and I intend to cross brace every 24" or so but don't intend to walk on the roof.

NeilTheCop is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design