EcoRenovator  

Go Back   EcoRenovator > Improvements > Solar Power
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 02-10-20, 12:14 AM   #21
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,125
Thanks: 15
Thanked 245 Times in 231 Posts
Default

I'm still working on getting the PLC transmitter to work as I want it to. The CD4046 did not really perform that much better than the 74LV4046A since it was getting pushed close to its operating frequency limit, what performed the best was the 74LV4046A with a very carefully tuned VCO circuit. Next comes the compander circuit, which I'm going to base around photoresistors illuminated by LEDs as the basis for a variable gain cell. I'll have to tune the gain control rates to get the best overall signal. (This is very much getting up to the Jim Williams level of analog circuit design!)

To help with testing, I have built a current signal simulator by connecting a coil of wire to an audio amplifier that I can play signals through with a PC. With 100 turns, the amplifier will only have to source 2A to emulate a 200A current.

I also got a 90A contactor that will be used to connect the grid, running the coil from 240V AC as intended, it uses 12W just to stay on and buzzes pretty loudly. But if I use a 170V DC pulse to turn it on and then supply 12V DC to hold it on, it's silent after switching on and uses just 0.8W! (I selected the voltage based on the current that was drawn when powered from AC. I have found that even in its worst case orientation, it will stay on with a mere 4V applied to the coil.)

__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Old 04-20-20, 08:12 AM   #22
randen
Uber EcoRenovator
 
Join Date: Apr 2011
Location: Strathroy Ontario Canada
Posts: 652
Thanks: 9
Thanked 181 Times in 126 Posts
Default

NiHaoMike

Just curious if there is any update on the progress of your inverter??? Our late winter early spring was quite disappointing for any serious product , alas we had to buy electricity

Randen
randen is offline   Reply With Quote
Old 04-20-20, 09:54 AM   #23
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,125
Thanks: 15
Thanked 245 Times in 231 Posts
Default

I got a lot more parts for the inverter (the inverter module itself, capacitor bank, inductor cores, various control circuit parts) and I'm working on it. It will be a long project for sure, one with a lot of learning opportunities.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
The Following User Says Thank You to NiHaoMike For This Useful Post:
Daox (04-20-20)
Old 06-21-20, 02:10 PM   #24
randen
Uber EcoRenovator
 
Join Date: Apr 2011
Location: Strathroy Ontario Canada
Posts: 652
Thanks: 9
Thanked 181 Times in 126 Posts
Default

NiHaoMike

Just wondered if you were able to get any electrons to flow yet. Here days are the longest and of recent quite warm. Our biggest consumers of current such as the Geo-heatpump and car charging are using most of the days production. Today being the longest is quite cloudy with thundershowers.. Oh well.

One of our fellow members is quite eager to follow in our footsteps with a single phase inverter. At this point of time I'm extremely busy with another huge project and can't possibly take on another.

Thought I would check in

Randen
randen is offline   Reply With Quote
Old 06-22-20, 12:48 AM   #25
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,125
Thanks: 15
Thanked 245 Times in 231 Posts
Default

Working on the wireless sensor - managed to get it outputting a nice, low jitter signal. For a test, I had it transmitting music over the power line and the quality is surprisingly good - not HD but about as good as expected for FM. Next up will be implementing the subcarriers for the phase current imbalance and digital data transmission. I now understand why no commercial zero export inverter uses PLC for the sensors - it's hard to get right.

I also started planning out the FPGA design. The FPGA I chose is a Spartan 6 LX100-3, because it's relatively cheap (about $10 for the board!) and quite large with 180 DSP cores and just over 100k general purpose logic cells. It's not as energy efficient as the (much more expensive) Artix 7 I have, but it doesn't use enough power (just a few watts at most) to significantly impact the efficiency of the whole system and is unlikely to be pushed near the limits of what it can do, unlike the Artix 7 that was stuffed full of BLAKE256 instances and run at basically the maximum clock speed it's capable of when it was helping Naomi Wu.

__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design