05-08-17, 02:28 AM | #5 |
Lurking Renovator
Join Date: Mar 2014
Location: Nottingham
Posts: 13
Thanks: 1
Thanked 0 Times in 0 Posts
|
Thanks for your very comprehensive and helpful reply which confirms our thoughts about not shelling out a load of money on a new pcb in case it gets fried, because the fault lies elsewhere. Will check again for anything that resembles a fuse downstream from the line feed (have not seen one so far) and try to post a photo. I think these units have a hard life, as one compressor serves two evaporators but I'm no expert. May try to salvage some parts for future projects before it goes to the dump. Many thanks again.
|
|
|