EcoRenovator  

Go Back   EcoRenovator > Improvements > Tools
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 11-30-10, 11:44 AM   #1
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default Home Heat Loss Calculator = Energy Simulation Tool

("Energy Simulation Tools" should probably be a Sub-Forum. I have compiled a pretty big list of other tools that Ecorenovators might want to try.)

I have located another Energy Simulation Tool, this one on the Build It Solar website. This tool has a very straight-forward interface. You'll need to enable JavaScript in order to use it. IMHO, it would be more useful if it were in Excel or equivalent form, so that heat-loads could be established, while off-line.


This tool is called Home Heat Loss Calculator, check it out...

Regards,

AC_Hacker

Attached Thumbnails
Click image for larger version

Name:	heat-loss-calc.gif
Views:	5002
Size:	19.8 KB
ID:	1089  
AC_Hacker is offline   Reply With Quote
The Following User Says Thank You to AC_Hacker For This Useful Post:
MN Renovator (11-30-10)
Old 11-30-10, 04:44 PM   #2
RobertSmalls
Journeyman EcoRenovator
 
RobertSmalls's Avatar
 
Join Date: May 2009
Location: Buffalo, NY
Posts: 344
Thanks: 3
Thanked 17 Times in 15 Posts
Default

With Javascript, the complete script is embedded in the .html file, and the code is executed by your local machine. So right click your link, save as, et voila! It's usable even after you close your dial-up connection.
RobertSmalls is offline   Reply With Quote
Old 11-30-10, 07:20 PM   #3
MN Renovator
Less usage=Cheaper bills
 
MN Renovator's Avatar
 
Join Date: Nov 2010
Location: Minneapolis, MN
Posts: 939
Thanks: 41
Thanked 116 Times in 90 Posts
Default

Thanks for this.

I calculated as 26746 for everything above grade. Based on the heat output of my furnace and last years therms calculated into CCF using the value of heat from the gas and then calculating run time of the furnace. I'm sitting at 6.55 calculated hours of run time as a daily average for January with an 75000 btu input, 57000 btu output furnace. Either a modular furnace 45000 btu high and 30000 btu low or just a 35000 btu furnace would probably do the trick. I think 35000 btu is about as small as you can buy them.

I figure this tool is probably pretty close to matching my guess of somewhere between 30000-45000 btu from a 95+ efficiency furnace even though I have no clue what insulation is between the walls and the outside.
MN Renovator is offline   Reply With Quote
Old 11-30-10, 09:06 PM   #4
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Quote:
Originally Posted by RobertSmalls View Post
With Javascript, the complete script is embedded in the .html file, and the code is executed by your local machine.
I used to teach JavaScript, and it's not always so easy to grab it, but in this case, you are quite right.

I got my local copy running.

I even trimmed out some of the google-bits that made be a little nervous.

Thanks for the tip.

-AC_Hacker
AC_Hacker is offline   Reply With Quote
Old 11-30-10, 09:48 PM   #5
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Quote:
Originally Posted by MN Renovator View Post
Thanks for this.

I calculated as 26746 for everything above grade. Based on the heat output of my furnace and last years therms calculated into CCF using the value of heat from the gas and then calculating run time of the furnace. I'm sitting at 6.55 calculated hours of run time as a daily average for January with an 75000 btu input, 57000 btu output furnace. Either a modular furnace 45000 btu high and 30000 btu low or just a 35000 btu furnace would probably do the trick. I think 35000 btu is about as small as you can buy them.

I figure this tool is probably pretty close to matching my guess of somewhere between 30000-45000 btu from a 95+ efficiency furnace even though I have no clue what insulation is between the walls and the outside.
Sizing a furnace for fossil fuels usually consists of doing a heating load calc like you did, and increase that by 50%, sometimes by 100% to arrive at furnace output.

Sizing a Heat Pump consists of doing a heating load calc like you did, and choosing a heat pump with a heating capacity that is slightly smaller than what is indicated. Then a back-up provision is designed in to cover the heating needs during exceptional conditions. Some of the heat pumps have built-in electrical resistance heating, some have built-in gas, natural gas or propane.

It sounds like you're really doing it right, by using a computer program and checking your results against your heating bill.

Since you have this information right at your fingertips, it would be a dandy idea to detail your work with images and all, as an example for others who may be thinking along similar lines.

Best Regards,

-AC_Hacker

AC_Hacker is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design