12-19-11, 08:57 PM | #11 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
It's from the guy over on the next block. About Woburn Weather Center
I'm not sure what he's using.. I think it's one of these things..
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
12-21-11, 06:23 AM | #12 |
Journeyman EcoRenovator
Join Date: Oct 2011
Location: Cincinnati ohio
Posts: 338
Thanks: 40
Thanked 35 Times in 31 Posts
|
hmm well im looking at getting one of these..
WS-1516U-IT by La Crosse Technology - Tomorrow's Weather Today (i found it for about 90 elsewhere) anyone have any thoughts on this one or others? |
12-21-11, 08:06 AM | #13 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
I've got a $30 basic model under the tree..
Amazon.com: Ambient Weather WS-1171 Wireless Advanced Weather Station with Temperature, Dew Point, Barometer and Humidity with Calibration: Patio, Lawn & Garden But, it's the WS-1170 w/o humid-calabration. ;( This the fancy model, with the best reviews.. Amazon.com: Ambient Weather WS-1090 Wireless Home Weather Station w/ Data Logging & Atomic Time: Home & Garden I don't need all that data logging junk.. Just the basic info.. I guess the product reviews will come after the 25th...
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
12-21-11, 04:53 PM | #14 |
Journeyman EcoRenovator
Join Date: Oct 2011
Location: Cincinnati ohio
Posts: 338
Thanks: 40
Thanked 35 Times in 31 Posts
|
hmm i kinda like the second one.. might have to order that after xmas to see if the wind in my area is up for a wind generator.. my average wind speed here is 10 according to a few websites..
|
12-21-11, 05:21 PM | #15 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
Have you seen the Solar version of the 1090?
WS-1090-SOLAR WIRELESS HOME WEATHER STATION w/ SOLAR POWERED SENSORS ATOMIC TIME | eBay Don't need any batteries for the outdoor unit? One nice thing I heard about the WS-1170 (& 1171) unit, is the Time receiver is out there inside the outdoor module.. Meaning it's going to clear of a lot of computer & other RF noise inside the house.. Maybe more accurate time setting!!
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
12-21-11, 08:31 PM | #16 |
Journeyman EcoRenovator
Join Date: Oct 2011
Location: Cincinnati ohio
Posts: 338
Thanks: 40
Thanked 35 Times in 31 Posts
|
That one looks pretty sweet too.. I'd like to have one that measures wind speed and direction... Also I got my first electric bill... In 12 days I used 178kwh that includes a few days of continues running of the blower fan on my furnace (had a few issues with furnace) I don't think thats to bad at all
|
12-21-11, 11:12 PM | #17 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
That's not bad.. Less than 15 kWh per day ave. That's about what our Sanyos are using these days.
I've done some reading about measuring airspeed. And I've seen some videos on YouTube about how critical it is to place the anemometer in the right location. Anything that can cause air turbulence can seriously affect the instrument. It's got to be mounted high up in clean air, and not downwind from trees, houses, hills, ham radio antennas, houses & etc.. I once installed an old anemometer, mounted on a 2 foot shaft, at different locations around the deck railing and other places in the backyard. Location makes a big difference. For wind info (before going for a hike or bike ride), I found the most accurate info comes from the local airport. Since I'm a lazy person, if I had some good land, I would install PV and never mess with with wind at all. Too many moving parts and way to many things to wear out. The failure and repair rates on those things is too high for me. Plus, a really high gusting wind can rip them up PDQ.
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
12-29-11, 05:10 PM | #18 |
Journeyman EcoRenovator
Join Date: Oct 2011
Location: Cincinnati ohio
Posts: 338
Thanks: 40
Thanked 35 Times in 31 Posts
|
well after watching the sun for a few days.. there are little problems with each spot i planned on putting the panels..
here is an over view of my property.. outlined in red is my property.. blue is higher ground about as tall as house. brown line is a ridge where my property drops about the hieght of the house also.. (bottom of pic is south) |
12-29-11, 06:18 PM | #19 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
The best looking spot (from a Google Earth viewpoint) is about 150' SW of the house.
The ground there is about 22 feet lower than the blue area. But, it seems like it might be the best area, since (it looks like) there's not much else that's real close in. There may be some blockage, you just need to find out if it's going to be too much blockage. Then there is the also the possibility of clearing some of that blockage by using a high mounted array.. If the array was 10 or 15 feet off the ground, it might get full sun for a longer period of time.. I don't think there are very many 'idea' solar mount locations, there will always be something that's going to cast a shadow at some point. I think my backyard mounts get about 3 hours of good sun this time of year..
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
01-03-12, 02:17 PM | #20 |
Journeyman EcoRenovator
Join Date: Oct 2011
Location: Cincinnati ohio
Posts: 338
Thanks: 40
Thanked 35 Times in 31 Posts
|
ugh i just ran across an amazing deal on panels locally.. there is a company that has an over stock.. brand new panels at 1.11 a watt!! 180watt panels minimum of 5 panels.. 900Watts for 1000$.. not really wanting to spend that much right now but its almost to good to pass up..
|
|
|