DIY blown fiberglass

Exeric · 11-01-12, 06:01 PM

I'm also about at the point of putting in blown insulation that I was going to do myself. I was going to do fiberglass using the machine from Home Depot since it seemed cheap and relatively easy for a diyer. Is there anything wrong with using fiberglass over cellulose? I already got the 1/6" mesh netting from JR instead of the insulweb. Maybe I screwed up there? I'm new to this also so I don't pretend I'm not trying to figure it out as I go along. Any help would be appreciated. Thanks.

11-01-12, 06:01 PM	#1
Exeric Apprentice EcoRenovator Join Date: Aug 2012 Location: California Posts: 274 Thanks: 19 Thanked 37 Times in 28 Posts	DIY blown fiberglass I'm also about at the point of putting in blown insulation that I was going to do myself. I was going to do fiberglass using the machine from Home Depot since it seemed cheap and relatively easy for a diyer. Is there anything wrong with using fiberglass over cellulose? I already got the 1/6" mesh netting from JR instead of the insulweb. Maybe I screwed up there? I'm new to this also so I don't pretend I'm not trying to figure it out as I go along. Any help would be appreciated. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode