EcoRenovator  

Go Back   EcoRenovator > Improvements > Solar Power
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 02-01-09, 04:13 PM   #41
groar
X-Frenchy: very
 
groar's Avatar
 
Join Date: Sep 2008
Location: Toulouse, France
Posts: 153
Thanks: 0
Thanked 2 Times in 2 Posts
Default

One thing I confirmed during the blackout : the inverter stops when the grid doesn't provide power. This is a requirement by European norms : the time between grid's power loss and inverter switch off must be lower than 200ms.

Does your inverter has the same behavior ?

In some regions, the power provided can have perturbations. Some inverter take some times to reset the mpp (max power point) tracker and resynchronize with the grid : up to a couple minutes. Some inverter are very quick to disconnect : 20-50 ms.
From time to time I can have several microcuts per day, so some appliances are resetting. My inverter wait as much as possible (200 ms) before powering off when there is perturbations/power loss. Since my panels are connected I don't remember having any microcut, but 2 months 1/2 isn't significant enough to be able to say that my inverter "erases" these small perturbations.

Denis.

__________________
Earth absorbs 1.8 t CO2/head/yr, while a French generates 6.2 t CO2/yr
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
  • kg saved 06/08-08/09: 1816.9+382.9 (ecodriving / 1420mi not driven) = 2199.8
    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    (2.66 kg/l diesel)
  • kg saved by 3kWc photo-voltaic solar panels : 187 kg/yr
    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    (59.1 g/kWh)
Radioactive wastes saved by 3kWc photo-voltaic solar panels :
  • Long life (>100,000 years) : 2.85 g/yr (0.9 mg/kWh)
  • Short life (<300 years) : 31.7 g/yr (10.0 mg/kWh)
Based upon "official" French figures...
groar is offline   Reply With Quote
Old 02-02-09, 07:03 AM   #42
jwxr7
Apprentice EcoRenovator
 
jwxr7's Avatar
 
Join Date: Dec 2008
Location: mid michigan
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
Default

mine also shuts down if the grid voltage or frequency falls outside of certain parameters. It can disconnect as fast as .16 seconds for certain frequency and voltage issues, or up to 300 seconds for certain mildly low frequency problems.
jwxr7 is offline   Reply With Quote
Old 02-04-09, 06:53 AM   #43
jwxr7
Apprentice EcoRenovator
 
jwxr7's Avatar
 
Join Date: Dec 2008
Location: mid michigan
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here are the whr #s from the last 7 days (Jan 28 - Feb 3)

Wed 720
thurs 180
fri 500
sat 520
sun 1300
mon 440
tues 780
jwxr7 is offline   Reply With Quote
Old 02-04-09, 04:52 PM   #44
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by jwxr7 View Post
mine also shuts down if the grid voltage or frequency falls outside of certain parameters. It can disconnect as fast as .16 seconds for certain frequency and voltage issues, or up to 300 seconds for certain mildly low frequency problems.

I've been looking over the specs of the Enphase stuff and read about the grid failure-system shutdown test.
It seems like a reasonable test that should be preformed once in a while to insure that no PV power gets sent out on the grid during a power failure.


I wonder if the Enphase minis can be used off-the-grid, by tricking them
with a portable AC source? (Like an UPS(APC) or a gas generator)?

Cheers,
Rich
Xringer is offline   Reply With Quote
Old 02-05-09, 08:18 AM   #45
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default Digital meter might explode??? ;)

Wow! After watching the installation video, this 700 watt system looks like it would be a snap for a DIY project.
GTe .7


But, when the home use was less than 700 watts, what would the meter do?
(Mine looks kinda like this).


Would it stall? Count backwards? Or maybe read outgoing power
as incoming power and add more to your bill??

Thanks,
Rich
Xringer is offline   Reply With Quote
Old 02-05-09, 09:43 AM   #46
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

I've heard if you have a digital meter they have to come back and install a second meter as they can not count backwards. Maybe things have changed in recent years, but that is one thing I heard.
Daox is offline   Reply With Quote
Old 02-05-09, 11:11 AM   #47
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

If the meter is using an inductive pickup, I wonder if it can even tell the direction of power flow?
If it can't, and I fed my surplus power into the grid, the meter might actually go UP and I would be billed, as if I was the user, not the producer of that (backwards moving) power.

Having two 'dumb' meters wouldn't help much, unless you piped all your PV power out of your house via the extra meter, and onto the grid. Not using any of it in your home, except via your regular meter.

How they calculate the 'net' difference and deduct from your bill is another thing I'm wondering about..

That kind of two 'dumb' meter system wouldn't really work well, once people saw how easy it would be to steal some power. The more you steal, the more money you get back.. LOL!



I think the old style mechanical meter would be the best way to go. It seems like a good Net meter should work like the old style mechanical meters!

Edit:
Just found this: Electric Meter for Net Metering ? - Solar Electric Discussion Forum by Northern Arizona Wind & Sun
"This is bad - I'm being charged for power I'm making!"

Last edited by Xringer; 02-05-09 at 11:25 AM.. Reason: Found info:
Xringer is offline   Reply With Quote
Old 02-11-09, 07:56 AM   #48
jwxr7
Apprentice EcoRenovator
 
jwxr7's Avatar
 
Join Date: Dec 2008
Location: mid michigan
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I have a mechanical meter on my house and it will run backward when backfeeding the grid.

We have had a huge warm-up here the last couple days. It was 60f yesterday (we were around -20f only a week ago) so the ground was soft enough for me to screw in a mobile home type anchor to help hold my array in place. It's a good thing too, we Are supposed to get high winds when the cold air moves back in tonight.

Edit; conditions are almost nonexistant to allow backfeeding with my puny system.

Last edited by jwxr7; 02-25-09 at 08:12 AM..
jwxr7 is offline   Reply With Quote
Old 02-11-09, 08:03 AM   #49
jwxr7
Apprentice EcoRenovator
 
jwxr7's Avatar
 
Join Date: Dec 2008
Location: mid michigan
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I forgot to write down my weekly #s . I'll update later, I'm at work now. I did have some good days though . I'll try to get a # for a full month too.
jwxr7 is offline   Reply With Quote
Old 02-12-09, 06:52 AM   #50
jwxr7
Apprentice EcoRenovator
 
jwxr7's Avatar
 
Join Date: Dec 2008
Location: mid michigan
Posts: 191
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here are some watt hour #s for wed feb 4th thru wed feb 11th;

wed 1320
thurs 820
fri 1360
sat 800
sun 1080
mon 400
tues 1080
wed 20

jwxr7 is offline   Reply With Quote
Reply


Tags
electric, solar

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design