05-22-22, 06:18 PM | #1 |
Helper EcoRenovator
Join Date: Nov 2014
Location: Michigan
Posts: 68
Thanks: 3
Thanked 2 Times in 2 Posts
|
using pressure to circulate water
I want to circulate water by using air pressure. Imagine a vessel with air in and water out, the water then returns to the same vessel.
I know it takes a check valve but it might need to be very sensitive? I'll be trying this with a mock up (small jar and a loop) to test it out. Its for cooling on a small scale. Any thoughts? |
05-22-22, 10:17 PM | #2 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
You'll need to use the pressure to get the water to the highest point in the system, then vent the air. The water will then be free to drain back down via gravity. You'll probably need to turn off air for a bit to let the water back into the reservoire.
An air powered pump might be easier though.
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
05-26-22, 06:56 PM | #3 |
Helper EcoRenovator
Join Date: Nov 2014
Location: Michigan
Posts: 68
Thanks: 3
Thanked 2 Times in 2 Posts
|
Please think very small flow rate. The air pressure is from an aquarium pump. Pressurizing a small vessel with ice and water, then flowing to a loop and returning. The check is to prevent flow to the return, I think tiny head on that return so very sensitive check valve.
|
05-27-22, 01:35 AM | #4 | |
Helper EcoRenovator
Join Date: Aug 2014
Location: The Netherlands
Posts: 70
Thanks: 19
Thanked 26 Times in 14 Posts
|
Quote:
Could you draw a small diagram? |
|
05-27-22, 05:09 AM | #5 |
Supreme EcoRenovator
|
Sounds like a job for a water farm column to me. Works like magic.
|
05-27-22, 09:49 AM | #6 |
Helper EcoRenovator
Join Date: Nov 2014
Location: Michigan
Posts: 68
Thanks: 3
Thanked 2 Times in 2 Posts
|
Zwerius; I was hoping the pressure combined with the slight head would return flow through a sensitive check valve to the vessel.
I may just use a second vessel for the return flow. I would use a pump but the flow rate is so very low I don't know where to source one. |
12-06-23, 04:50 PM | #7 |
Lurking Renovator
Join Date: Oct 2020
Location: North Lincolnshire, England
Posts: 29
Thanks: 3
Thanked 1 Time in 1 Post
|
A small peristaltic pump would work. You can get a 12 volt one which delivers about 70mls/min but you can run it at a lower voltage as long as you don't want to pump to a great height. It will then deliver a good bit lower flow.
|
Thread Tools | |
Display Modes | |
|
|