06-16-17, 01:22 AM | #1 |
Helper EcoRenovator
Join Date: Apr 2015
Location: US
Posts: 42
Thanks: 5
Thanked 1 Time in 1 Post
|
Using an automotive evaporator core?
I'm trying to build a combination water heater/air conditioner on the cheap. I already have a 5,000 BTU compressor, expansion valve, filter, etc. The condenser will be a coil of copper tubing in a container of water.
What I don't have is an evaporator. I'd like to try and use a cheap automotive evaporator core, but, they all have odd non standard connections on them. I'm wondering if I bought a cheap core like this: NEW Ford Escort 1987-1990 GL GT LX Base A/C Evaporator Core 54439 OE | eBay Can I just cut the ends off the aluminum tubes, flare them, and then use standard flare fittings to attach it to the rest of my system? I suppose it's possible to just braze it to some copper tubing, but, I don't really want to try and braze aluminum. |
|
|