|
|
Advanced Search | |||||||
 |
|
|
Thread Tools | Display Modes |
09-21-09, 08:01 AM
|
#1 |
|
Administrator
Join Date: Aug 2008
Posts: 291
Thanks: 3
Thanked 4 Times in 4 Posts
|
DIY Ground Source Heat Pump – Part 6: Testing Plastic Welds
This entry is part 6 of 6 in the series DIY Ground Source Heat PumpNow that AC Hacker has his home made plastic welder all put together, he could start doing some welding.* But, how was he to know if his welds were all sealed perfectly tight?* They certainly need to be, otherwise the system [...]Post from: EcoRenovator.org
DIY Ground Source Heat Pump – Part 6: Testing Plastic Welds More... |
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
