EcoRenovator  

Go Back   EcoRenovator > Improvements > Geothermal & Heat Pumps
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 01-25-12, 10:00 AM   #1
abogart
Efficiency Afficionado
 
abogart's Avatar
 
Join Date: Jan 2012
Location: Michigan, US
Posts: 68
Thanks: 21
Thanked 6 Times in 4 Posts
Lightbulb How cold is TOO cold for an ASHP?

*TEASER WARNING*

I have a couple old window AC units sitting in the garage, and this forum has really got me thinking about putting them to use.

When I get a chance (among the many projects I intend to tackle) there is a spot in the garage wall that I can easily knock out and put one of the units in backwards. I'm just curious how much heat a little 6,000 BTU window AC unit can actually put out when the outside temp here in Michigan is in the 20's, or if it will even work at all. I figure the garage is a good enough place to start, as I do go out there and work from time to time. At least I can experiment without cutting holes in the house or ductwork.

I'll give it a shot as soon as I can and keep you all posted.

abogart is offline   Reply With Quote
Old 01-25-12, 03:59 PM   #2
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

My Sanyos start working badly when it gets down near 5 or 6 degrees F..
But above that, they keep the house nice and warm..

A few years ago, I started wondering about ASHPs and messed around with backwards ACs.

I actually found the posts on the web!!

Window AC used as a Heat Pump.?. - DoItYourself.com Community Forums
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
The Following User Says Thank You to Xringer For This Useful Post:
abogart (01-26-12)
Old 01-26-12, 08:22 AM   #3
PaleMelanesian
Apprentice EcoRenovator
 
PaleMelanesian's Avatar
 
Join Date: Sep 2008
Location: Texas
Posts: 118
Thanks: 4
Thanked 10 Times in 9 Posts
Default

It depends a lot on the system. My old central heat pump could handle freezing but not much lower. The new central heat pump is good at least to 25F, the coldest we've had this year.
PaleMelanesian is offline   Reply With Quote
The Following User Says Thank You to PaleMelanesian For This Useful Post:
abogart (01-27-12)
Old 01-27-12, 12:21 PM   #4
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

My little ASHP (Sanyo) has worked well down to 12F. I can see that the power used per hour has increased but it just keeps the warm air wafting about in my home.

But I think that the lower limit is influenced by the type of refrigerant that is used.
  • Boiling Point of R-22 = -40.7 °C (-41 °F)
  • Boiling Point of R-290 = -42 °C (-44 °F)
  • Boiling Point of R-12 = -29.8 °C (-22 °F)
  • Boiling Point of R-600a = -11 °C (12 °F)
  • Boiling Point of R-410a = -48.5 °C (-55 °F)

These boiling points are for atmospheric pressure. When the refrigerants are in a system, they are under pressure, and the boiling point will be higher. This is where a pressure/temperature chart (AKA: PT Chart) comes in handy.

-AC_Hacker
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
Old 01-27-12, 03:22 PM   #5
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default

I'm not sure how well the actual unit handles cold but at -4C my controller switches to the electric backup. I doubt the controller has any knowledge at all of the heat pumps ability to work at this temp and is just programmed to switch over.
strider3700 is offline   Reply With Quote
Old 01-27-12, 03:51 PM   #6
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by strider3700 View Post
I'm not sure how well the actual unit handles cold but at -4C my controller switches to the electric backup. I doubt the controller has any knowledge at all of the heat pumps ability to work at this temp and is just programmed to switch over.
That's about 24.8 deg F. Not super cold. At least not for a modern Mini-Split (R410A).
The Sanyos do a good job down in that range. They really start using more power
when it gets down in the teens, but can still keep the house nice and warm,
until we get single digits.. At about 8 deg F (-13.33C) power use maxes out,
but is still not too bad.
When it hits 5 deg F (-15C), that's when I just turn them off and go to backup.

We've been lucky this season, since it's only dropped to 4 °F, once or twice..
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 02-11-12, 06:46 AM   #7
dc€x
Lurking Renovator
 
Join Date: Jan 2012
Location: Artic Circle
Posts: 27
Thanks: 2
Thanked 8 Times in 6 Posts
Default

I feel the residential heating by ASHP is not specially challenging in N-America,if the widgets ,supplied locally, could only somehow manage -15degC with reasonable COP (>>1,5).

In N-Europe practically all AC (R410) at heating mode cope easily with that
minus15C ... some even "well" with -25C.

Below one collection of test reports (note, defrosting included in the results) in Finnish:

Ilmalämpöpumppuvertailu - VTT:n testiraportit | Scanoffice

and further one sample of ME`s MUZ/MSZ FD35VABH -model:


http://www.scanoffice.fi/uploads/vtt...S-08820-10.pdf


Look at pdf.page 9/11 (POWER W vs. TEMPERATURE C(elsius)

The corresponding COP vs.temp. (defrosting incl.!) shown at .pdf 7/11

It is for sure the pumps do not enjoy the conditions -20C ... -30C.
The deep-cold POE-oils should be returned back to the compressor at random basis (forced defrosting mode,trigged like egg-clock by software) ,eventhough there is no frost at the evaporator due to extra low humidity in the outside air (RH <30%)!

dc€x is offline   Reply With Quote
The Following User Says Thank You to dc€x For This Useful Post:
abogart (02-11-12)
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design