WSHP: Supply well and return well spacing?

simenad · 03-22-17, 05:17 PM

havent measured changes but water temp iw always around 55f. I have a 10 ton and a 5 ton unit running off it. I dont know what flow rates are for the units but I know the well was tested at 12.5gpm when it was installed 30 years ago. Well dept is about 75 ft and i use a 1/2 hp submerged pump and it supplies the whole house and 2 geo units no problem.

[QUOTE=slippy;54055]@simenad:
Have you measured temperature changes over time?
What is your tonnage and flow rate?
What kind of pump(s) are you using?
Does the injection well have any problem taking the water?[/QUOTE]

03-22-17, 05:17 PM	#30
simenad Lurking Renovator Join Date: Jan 2014 Location: Ottawa Posts: 11 Thanks: 1 Thanked 0 Times in 0 Posts	havent measured changes but water temp iw always around 55f. I have a 10 ton and a 5 ton unit running off it. I dont know what flow rates are for the units but I know the well was tested at 12.5gpm when it was installed 30 years ago. Well dept is about 75 ft and i use a 1/2 hp submerged pump and it supplies the whole house and 2 geo units no problem. [QUOTE=slippy;54055]@simenad: Have you measured temperature changes over time? What is your tonnage and flow rate? What kind of pump(s) are you using? Does the injection well have any problem taking the water?[/QUOTE]