battery equalization and diversion loads

sunspot · 03-01-17, 08:57 AM

Is there a simple/elegant way to automatically disconnect diversion loads while batteries are equalizing?

Small, single panel (190 watt), off grid, 24 vdc system. PWM controller.

Thanks folks!

Greg

Fordguy64 · 03-01-17, 10:30 AM

Hmm not sure on an automatic way. But I'm assuming you have to manually put the controller into equalize mode. If so you just put a switch or breaker of some sort before the dump load.

03-01-17, 08:57 AM	#1
sunspot Apprentice EcoRenovator Join Date: Apr 2012 Location: Vancouver Island, BC Posts: 146 Thanks: 30 Thanked 35 Times in 29 Posts	battery equalization and diversion loads Is there a simple/elegant way to automatically disconnect diversion loads while batteries are equalizing? Small, single panel (190 watt), off grid, 24 vdc system. PWM controller. Thanks folks! Greg

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-17, 10:30 AM	#2
Fordguy64 Journeyman EcoRenovator Join Date: Oct 2011 Location: Cincinnati ohio Posts: 337 Thanks: 38 Thanked 35 Times in 31 Posts	Hmm not sure on an automatic way. But I'm assuming you have to manually put the controller into equalize mode. If so you just put a switch or breaker of some sort before the dump load.