10-18-13, 06:27 PM | #1 |
Super Moderator
Join Date: Jun 2013
Location: SC
Posts: 2,923
Thanks: 172
Thanked 564 Times in 463 Posts
|
Mini Split install
List of tools I bought for the install and review of the two systems are here.
http://ecorenovator.org/forum/geothe...nstall-12.html Mini Split install (this is my first mini split install) I made some progress. Bracket installed. I measured a few times and made sure it mounted on two 2x4's. Then I made sure the 3” hole was free from everything but drywall. Inside unit installed. It did this by myself and it is fun getting it through the hole with 2 ft copper pipe sticking out. I stood on my night stand and almost fell off when putting it on the wall. Line set cover installed. I put silver line set tape on the screws just to keep sharp edges away from the line set. Inside unit wired. Last edited by pinballlooking; 04-26-15 at 12:38 AM.. |
Thread Tools | |
Display Modes | |
|
|