|
Advanced Search |
|
Thread Tools | Display Modes |
07-30-21, 11:47 PM | #11 |
Lurking Renovator
Join Date: Apr 2013
Location: KY, USA (deployed to Djibouti, Africa)
Posts: 8
Thanks: 3
Thanked 0 Times in 0 Posts
|
Nice!
I'm a journeyman machinist by trade. The Ecello is a nice heavy duty machine, emphasis on the heavy! To that point, please don't put it on wheels. I know the mobility is attractive, but the mill needs to be very accurately leveled to run right. I use a master precision level, accurate to .0002" in 10". like this:https://www.amazon.com/findmall-Prof...xpY2s9dHJ1ZQ==
If you put it on wheels, it will twist as you move it, and you will find it impossible to get a square, parallel cut. That mill can do a huge amount of work, and you are in for many hours of fun learning to use it! |
Thread Tools | |
Display Modes | |
|
|