sizeing a mini split

[nokiasixteth]

Originally Posted by insaneintenti0n

Oh. Condensation too. You better make darn sure those interior wall units are mounted right or all that condensation will end up inside and dripping down your wall or on whatever is under the unit. And if the insulation on the copper rips, condensation IN your wall.

They're probably fine for a single room (garage) but definitely too much effort for a whole house.

You got that right on the condensation . I had a kink in the water hose i had ran down. I heard drip drip . Drip .. Went cut the hose shorter . Never been a problem since .
Now on the whole house . Since i bought it . My Kw usage hasnt went above 10 kws . And thats for everything i use in the house . Where It was a whole lot more . I did also do a whole lot of planning before hand of me buyin the mini . Figured out about how much btu per sq ft i needed and thats how i bought mine so it would run around 75 % capacity i really cant remember now. But i made sure it wouldnt be strainin .