EcoRenovator  

Go Back   EcoRenovator > Improvements > Geothermal & Heat Pumps
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 01-06-23, 01:20 AM   #1
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default Universal Air-Source Heat Pump Controller

I came across a remarkable, inexpensive device that can make building a Homemade Heat Pump much easier. In the "Manifesto" thread, we hit a bump because in our attempt to design a simple cheap controller, we found that it was was not so easy.

Recently, I discovered a well made controller that had all the functions needed to make a full function Air Source to Water heat pump. The hot water from this unit can be for typical domestic purposes, and of great interest to me, the hot water can be used for home heating. Of course, many other uses for water, cheaply heated can be found.

The complete controller with all parts and LCD readout is: ZL-R200A

The controller can be bought at many outlets:
  • AMAZON for $80
  • eBay: for $50 to $60
  • And various Chinese outlets for about $38

I think that this device is going to be a game changer.

Best,

-AC_Hacker

__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
The Following User Says Thank You to AC_Hacker For This Useful Post:
jeff5may (01-14-23)
Old 01-14-23, 12:22 PM   #2
jeff5may
Supreme EcoRenovator
 
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,428
Thanks: 431
Thanked 619 Times in 517 Posts
Send a message via Yahoo to jeff5may
Default

Yep, I started working with acuario to try and do up something universal, but his rig was very setup specific. A whole lot of parameters to enter, plus the web server, iot side of setting up the interface. I was looking for something more standalone and simple to get going.

I ended up using much the same boards as you . I think Gary (xringer) posted up a product that led me to discover a whole bunch of boards, many different badges but the same OEM. The OEM was qunda. QD line, I used one on my 2 ton window shaker build. And on later ones, too. The one I documented from the getgo was this one:
https://ecorenovator.org/forum/showthread.php?t=4640

And here's the control unit I used:
https://www.smartclima.com/universal...em-qd-u12a.htm

If you scroll down to the bottom of the page, the seller lists a whole bunch of similar control boards. Main differences are:

-Heating only, cooling only, or both w/reversing valve control (the control units have the reversing valve active in heating mode; most split units are plumbed cooling active)

-LCD panel display, numerical display, or just a few LED lights

-Number of temperature sensors (more is smarter)

The other resource I found was this one:
https://www.instructables.com/Valden...mp-Controller/

But it was for ground loop systems. Not readily adaptable to air source based setups without adding software and hardware. I believe it only did heating also.


Last edited by jeff5may; 01-15-23 at 11:55 AM.. Reason: Info and links
jeff5may is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design