11-09-13, 09:54 AM | #35 |
Apprentice EcoRenovator
Join Date: Nov 2013
Location: Moore Oklahoma
Posts: 267
Thanks: 108
Thanked 23 Times in 21 Posts
|
Have you considered using a standard HVAC contactor and a delay on break timer? Seems like it would be a lot simpler and cost less to build. 4 parts total:
1: 24vac transformer 2: Delay on break timer (most are either 3 or 5 minutes fixed) 3: Standard HVAC contactor 4: Current switch (same as you are now using to break connection above certain amperage, you would use the NC contacts instead). You could also use a standard HVAC hard start relay if you could find one with the amperage you required. Last edited by Servicetech; 11-09-13 at 10:03 AM.. |
|
|