EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 03-05-16, 08:51 AM   #11
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Yeah if I build this thing it's going to be fairly large. I have 60 feet of sewer pipe. To be worth anything I know it will have to be at least 20 feet long.
Only 2 things limit the size :
The physical length of 60 feet.
The availability of 50 cent a pound scrap stainless.

I expect efficiency to only be between 20% and 60%.

Even if all it does is 10% efficiency and prevent the pipes from freezing abs bursting then it will have been worth it.

I don't think that copper would be strong enough. All industrial heat exchanges are made of stainless.

oil pan 4 is offline   Reply With Quote
Old 03-28-16, 07:27 PM   #12
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

I picked up 30 to 40 feet of 0.083'' wall stainless today from the scrap yard.
I did not get very much 2.5 inch pipe and I am pretty sure the 2.5 inch pipe I got is not 80 wall.
So there isn't really any reason why I cant. I thought the main hang up was going to be finding enough 80 wall 4 inch pipe.
oil pan 4 is offline   Reply With Quote
Old 03-28-16, 08:06 PM   #13
stevehull
Steve Hull
 
Join Date: Dec 2012
Location: hilly, tree covered Arcadia, OK USA
Posts: 826
Thanks: 241
Thanked 165 Times in 123 Posts
Default

Before you go to all this trouble, PLEASE verify your waste water heat value. You claim it is between 80 and 90 F.

Waste water recovery works best when the water inlet temp is cold, preferably below 45 F. I believe your water inlet temp is about 65 F.

Do not get the peak temp of waste water, get a 24 hour average. Not hard to do. THEN, design the heat recovery system.


Steve
__________________
consulting on geothermal heating/cooling & rational energy use since 1990
stevehull is offline   Reply With Quote
Old 03-29-16, 12:03 AM   #14
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Here the city some how has gotten away with burring the water line less than 2 feet.
So during the winter we get water that is ice cold. Its not freezing but close. The natural gas water heater acts more like an electric, as in it cant keep up.

A 24 hour average is kind of useless since water is not flowing out 24 hours a day. I could run each house hold device, pop the top off one of the sewer clean outs and point my flir at the out going water.
My wife takes raging hot showers, that one would be the most interesting to see going out.
oil pan 4 is offline   Reply With Quote
Old 03-29-16, 09:14 AM   #15
jeff5may
Supreme EcoRenovator
 
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,431
Thanks: 431
Thanked 619 Times in 517 Posts
Send a message via Yahoo to jeff5may
Default

The "piggyback" hx you mocked up will do fine on horizontal drain runs. It should live 100 years or more as a drain line. Just make sure the fresh water channel has a way to burp itself. Your heat transfer surface lies directly where air will accumulate if allowed to.

In an industrial hx, they use stainless because it is stronger and less expensive than copper. It is not an awesome heat conductor, so when the unit has to be compact, they use cupronickel (copper stainless) or (you guessed it) copper for the working transfer tubing. In modern industry, less expense translates to more return nearly always.
jeff5may is offline   Reply With Quote
Old 03-29-16, 02:17 PM   #16
stevehull
Steve Hull
 
Join Date: Dec 2012
Location: hilly, tree covered Arcadia, OK USA
Posts: 826
Thanks: 241
Thanked 165 Times in 123 Posts
Default

All you need to do (to measure the outgoing sewer water temperature) is to buy one of the inexpensive digital temperature recording devices (see below), put it in a plastic freezer bag and weight it down in the sewer outlet with a string attached. Then retrieve it in a few days.

It will show you the maximum, minimum and average temperature of the water over the data collection period.

Here is a simple RC-5 recorder that works well for me.

RC 5 USB Temperature Data Logger Temp Recorder Internal Sensor 32000 Points New | eBay

When you speak of "freezing cold" winter water - is this a temperature or a subjective assessment? For example, if I get into the shower and it seems "freezing cold" it might be 80 F.

Metrics make all the difference in planning . . . .


Steve
__________________
consulting on geothermal heating/cooling & rational energy use since 1990
stevehull is offline   Reply With Quote
Old 03-30-16, 02:55 PM   #17
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

I also picked up a high frequency starter/stabilizer box.
This will allow me to light the arc with out touching the base metal with the tungsten electrode.
Now I also have a gas saver kit for my WP-17 torch.



The idea is I will use the gas saver and a strip or angle iron held in place with a vice grip to guide the torch along weld, running hot, fast and perfectly straight creating a weld that looks like it was done with some kind of automated laser machine.
I want the welds I put on the actual pipe I am going to use to look a lot better than my quick and dirty test.

To split all the 2.5 inch pipe I think I will use a cut off wheel. It will be slow and will suck a lot but that will give me straight cuts with out warping the pipe. I already know if I use my plasma cutter it will bow the pipe. I may test filling the pipe with kitty litter and cutting it but I still expect the pipe to bow.

I am thinking my first live prototype will be a shower water heat exchanger. it has been a while since I have been up under the house, and if I remember correctly the shower drain pipe is 2 inch pvc goes for about 3 feet before it goes into the main line. The cold water line is also very close by.
It would be easy to make heat exchanger section and plumb it in there.
Attached Thumbnails
Click image for larger version

Name:	gassaver.JPG
Views:	1702
Size:	90.6 KB
ID:	6819  
oil pan 4 is offline   Reply With Quote
Old 03-31-16, 10:49 AM   #18
mejunkhound
Apprentice EcoRenovator
 
Join Date: Apr 2011
Location: PNW
Posts: 197
Thanks: 0
Thanked 47 Times in 31 Posts
Default

Keep track of how much time you spend on this, I'd be curious.

NOte: have done some projects myself that I figured my 'return' was about 12 cents per hour - but it was 'fun'. <G>
mejunkhound is offline   Reply With Quote
The Following User Says Thank You to mejunkhound For This Useful Post:
stevehull (03-31-16)
Old 04-01-16, 11:57 PM   #19
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

The thing with this project is once it's done it should work night and day for decades.
So far the only time I spent on this was building the mockups in the pictures, maybe 2 hours while I was at work one night when I had to stay late because no one on night shift bothered to show up to work. As long as I keep moving and do things the are visually stimulating no one bothers to ask what I am doing.
So in a strange way the time I spent on this project far has pretty much paid for most of the materials I need to build it for real.

oil pan 4 is offline   Reply With Quote
Reply


Tags
heat exchanger, heat recovery, preheater, waste heat, water heater

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design