|
Advanced Search |
|
Thread Tools | Display Modes |
05-18-15, 08:19 PM | #22 |
Lurking Renovator
Join Date: May 2014
Location: Ontario
Posts: 12
Thanks: 1
Thanked 0 Times in 0 Posts
|
This is what I was considering as a mixer, right after the air filter, at the beginning (top) of the elbow from the previous post.
1pcs LPG CNG Gas Mixer for Bi Fuel Conversion on Motorcycle | eBay The only thing I am wondering is will there be enough air velocity to trigger some vacuum and feed propane right after the air filter? I struggle to find a place my feed tubes/venturis lower in the elbow, near the carb. There is just no clearance to create a thicker gasket/feed plate between the air intake and the carb. |
|
|