|05-21-19, 04:36 PM||#1|
Join Date: Feb 2009
Location: Woburn, MA
Thanked 245 Times in 225 Posts
Help! Leaky Hot Water Tank problem!
My Electric hot water heater / PVsolar+heat pump Storage tank is leaking.
It seemed to be leaking around the Anode port.
I pulled out what was left of the Anode and ordered a replacement.
Made from aluminum
5/8" outside diameter
3/4" -14 NPT
Standard stuff. Installed it using Rectorseal 23631
It leaked, so I tried again. Still leaked.
Cleaned it up and tried Teflon tape/PTFE and it still leaked (very slow).
Cleaned it up and tried using 8 turns of 1" wide PTFE, it's still leaking!
Since the water heater is about 5 years old, I'm thinking about using
some kind of Cold Steel epoxy to permanently seal the Anode,
since the tank is already very near end-of-life..
Please impart some expert advice!
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..