03-07-14, 09:54 PM | #11 |
Master EcoRenovator
Join Date: Mar 2014
Location: Florissant, Colorado
Posts: 599
Thanks: 814
Thanked 59 Times in 55 Posts
|
where2, I wrote you back a detailed PM but it was discarded when I sent it as I have too few posts. Drat!
Mikesolar, yes I have drooled reading about Viessmann boilers. I have installed HTP, Triangle tube Solo 60 that's in my current house, & Weil-McLain for buddy. NiHoeMike, thanks for info This is sourced from the solar tank. "From 80* down to 35* I plan to source this to the heatpump evaporator. The destination from the condenser is the 120 gallon DHW / buffer tank." I want to keep the 120 gallon DHW / buffer tank in the 120-145* range. So it sounds like I need a R410a compressor? Surplus City has this one: 2-1/2 TON AC/HP SCROLL COMPRESSOR, VOLT:208/230, HERTZ:60, PHASE:1, LRA:96.7, CAPACITOR:45 X 370(NOT INCLUDED), REFRIGERANT:R-410A, CONNECTION SIZE:1/2" X 3/4" SWEAT, HEIGHT:16", BASE DIMS:7-1/2" X 7-1/2", WEIGHT:68 LBS, ORIGIN:USA SCL # : 171294 MFG : DANFOSS MFG # : HRH031U1LP6 would this be a good choice & is the voltage correct for 240VAC ? BBP |
Thread Tools | |
Display Modes | |
|
|