instant (kind of) whole house power display

scottorious · 04-23-13, 08:59 PM

So I have recently fallen in love with micro controllers, especially picaxe and I have built a device that counts the infrared pulses from my digital meter and does a calculation and then displays that result every 15 seconds. Each pulse from the meter is supposedly supposed to tell me that I used one watt hour so. I am working on making it wireless to be more convenient but thus far its pretty slick. I just figured out a way to data log onto my computer also so I can graph a days worth of data to see if I can figure out where I can cut. If anyone is interested I can go into more detail or share the circuit and coding for all of it.

ELGo · 04-24-13, 12:26 AM

Quote:

Originally Posted by scottorious

So I have recently fallen in love with micro controllers, especially picaxe and I have built a device that counts the infrared pulses from my digital meter and does a calculation and then displays that result every 15 seconds. Each pulse from the meter is supposedly supposed to tell me that I used one watt hour so. I am working on making it wireless to be more convenient but thus far its pretty slick. I just figured out a way to data log onto my computer also so I can graph a days worth of data to see if I can figure out where I can cut. If anyone is interested I can go into more detail or share the circuit and coding for all of it.

Lucky you -- I wish I had some ability with electronics.

If I am understanding you correctly, your calculation for watts will be
3600*pulses/15.
That leaves quite a range for error. You might be better off counting pulses for say two minutes at a time.

scottorious · 04-24-13, 07:02 AM

the equation I'm using is pulses*240 which is the same result as your equation. seems like it hasn't missed a pulse yet I have stood next to it with my video camera and night shot to make sure it does not miss one. I have thought about going out to two minutes or even five.

MN Renovator · 04-24-13, 07:09 AM

This same principle is used by devices such as the Black and Decker power monitor. I used to use one and it would update every 30 seconds to a minute depending on its mood and would display 300 watts minimum(often rounding up or bouncing between 300 and 0 with each update) but the kwh count remained accurate to the meter. My meter is a dial instead of a digital but the device handles both.

Just in case you need any ideas, you could look at that to see what features you might want.

04-23-13, 08:59 PM	#1
scottorious Helper EcoRenovator Join Date: Nov 2011 Location: bloomington IL Posts: 45 Thanks: 0 Thanked 1 Time in 1 Post	instant (kind of) whole house power display So I have recently fallen in love with micro controllers, especially picaxe and I have built a device that counts the infrared pulses from my digital meter and does a calculation and then displays that result every 15 seconds. Each pulse from the meter is supposedly supposed to tell me that I used one watt hour so. I am working on making it wireless to be more convenient but thus far its pretty slick. I just figured out a way to data log onto my computer also so I can graph a days worth of data to see if I can figure out where I can cut. If anyone is interested I can go into more detail or share the circuit and coding for all of it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-24-13, 07:02 AM	#3
scottorious Helper EcoRenovator Join Date: Nov 2011 Location: bloomington IL Posts: 45 Thanks: 0 Thanked 1 Time in 1 Post	the equation I'm using is pulses*240 which is the same result as your equation. seems like it hasn't missed a pulse yet I have stood next to it with my video camera and night shot to make sure it does not miss one. I have thought about going out to two minutes or even five.

04-24-13, 07:09 AM	#4
MN Renovator Less usage=Cheaper bills Join Date: Nov 2010 Location: Minneapolis, MN Posts: 939 Thanks: 41 Thanked 116 Times in 90 Posts	This same principle is used by devices such as the Black and Decker power monitor. I used to use one and it would update every 30 seconds to a minute depending on its mood and would display 300 watts minimum(often rounding up or bouncing between 300 and 0 with each update) but the kwh count remained accurate to the meter. My meter is a dial instead of a digital but the device handles both. Just in case you need any ideas, you could look at that to see what features you might want.