EcoRenovator  

Go Back   EcoRenovator > Improvements > Geothermal & Heat Pumps
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 09-01-21, 12:00 AM   #1
nzmikec
Lurking Renovator
 
Join Date: Jul 2018
Location: Masterton
Posts: 8
Thanks: 1
Thanked 0 Times in 0 Posts
Default HydroHero water heater - 4 way valve

Hi All,
Ive just had my hydrohero 260l heat pump hot water cylinder apart to replace a centrifugal fan. While in there I noted there is a 4 way valve installed on the refrigerant lines - presumably for defrost.

Our unit gets its air intake from the attic and only runs during sunlight hours. intake air temperatures are very high, never below 20 degrees Celsius and in summer it can reach 45-50 up there. This unit also moves a lot of air. Ive never seen it go into defrost.

What im thinking is that the 4 way valve in this setting is likely useless.

Is there an efficiency loss having it in the system? Being made of copper / brass I would presume there would be a bit of heat transfer as the hot refrigerant passes through the valve that also has the chilled vapour passing through it.

Would there be any benefit in removing this? I am looking at needing to rebuild this unit as the cylinder appears to have a slow water leak. Work could be done at this point.

Refrigerant is R417A, compressor is a Panasonic, uses about 700-900w when running.

pics for interest
https://www.dropbox.com/s/m14zar4k7m...5811.jpeg?dl=0
https://www.dropbox.com/s/r6hpsi7flx...5812.jpeg?dl=0
https://www.dropbox.com/s/xw4hyuwu7p...5813.jpeg?dl=0


Thanks all.

Mike


Last edited by nzmikec; 09-01-21 at 12:03 AM.. Reason: Not liking dropbox photos
nzmikec is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design