![]() |
![]() |
#1 |
Apprentice EcoRenovator
Join Date: Apr 2012
Location: Vancouver Island, BC
Posts: 147
Thanks: 30
Thanked 35 Times in 29 Posts
|
![]() Looking for thoughts/advice/experience. I've got an unused well (6" casing) I'd like to ressurect for watering an ~1/4 acre garden plot. The submersible pump I removed was hanging at about 100'. The water level comes almost to grade with sufficient recovery time (even in August). My thoughts so far lean towards a cistern charged by a small, direct PV powered (no battery), pump situated above grade, shallow well style, with a foot valve 80' or so down the casing.
Any thoughts, suggestions? If you know of a pump that would be a good fit please chime in. Is there a DC controller that would prevent the pump burning up should it draw air? Thanks, Greg |
![]() |
![]() |
![]() |
#2 |
Apprentice EcoRenovator
Join Date: Mar 2018
Location: Rustbelt, USA
Posts: 114
Thanks: 5
Thanked 10 Times in 9 Posts
|
![]() i'd recommend a low pressure cut-out switch. that will turn the system off if the pressure ever drops below say, 20PSI on a 40/60 system.
|
![]() |
![]() |
![]() |
|
|