Sanyo 24KHS72 AC/HP DIY install project

Xringer · 10-20-09, 02:26 PM

I see what you mean.. Well, it was a good try anyways.
The 800 number didn't work, since they don't have any stock right now
and I think they use crescent wrenches anyways!

Do you have any calipers? That service port cap might tell the tale if it's exactly 14 mm..

I know that I've used a mixed bag of metric and SAE for years,
and many times going by 'fit' when I needed to.

I'll bet if I ordered both Crowsfeet kits, I would have the right size
and very likely could find one that was very close in the other kit.
Meaning, I could use two flare wrenches on those upper connection. Maybe!

I'll find some cheap stuff, since I'm getting too old to buy tools that
are made to last more than 20 years..

Thanks,
Rich

10-20-09, 02:26 PM	#11
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	I see what you mean.. Well, it was a good try anyways. The 800 number didn't work, since they don't have any stock right now and I think they use crescent wrenches anyways! Do you have any calipers? That service port cap might tell the tale if it's exactly 14 mm.. I know that I've used a mixed bag of metric and SAE for years, and many times going by 'fit' when I needed to. I'll bet if I ordered both Crowsfeet kits, I would have the right size and very likely could find one that was very close in the other kit. Meaning, I could use two flare wrenches on those upper connection. Maybe! I'll find some cheap stuff, since I'm getting too old to buy tools that are made to last more than 20 years.. Thanks, Rich