EcoRenovator  

Go Back   EcoRenovator > Improvements > Geothermal & Heat Pumps
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 06-28-12, 11:51 PM   #1
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default A7 AirTap install (ASHP hot water heater)

Here's the links:

AirGenerate

http://airgenerate.xbitech.com/Media...ion_Manual.pdf

Web links?
An Affordable Heat-Pump Water-Heater Retrofit- GreenSource Magazine

Airgenerate_AirTap_Installation_Upgreen Store - YouTube

http://411plumb.com/airgenerate-a7-airtap-review/



Specifications: (Ambient Temp. 68˚F)
Max Water Temp: 130˚F
Energy Factor 2.2
1st Hour Rating (40 gal tank): 44.5 Gallons
Output kW 6.5 kW (Hybrid average)
Dimensions 18" x 14" x 14" (height)
Weight 50 lbs
Noise 50 db


AirTap™ Installation Requirements
Volts 115
Amps 6 operating (12A start)
Phase 1
Frequency 60 Hz
Space (ventilated or ducted) 250 cubic feet
Space (unventilated) 1,000 cubic feet



The goal is to discontinue burning oil for hot water and use the A7 AirTap ASHP.

Step 1. Will be product testing (as described in the manual), hopefully this weekend.
I'll post my findings and some pictures.

Step 2. Select the size and shape of the hotwater storage tank (aka electric hotwater heater), and order it.

Step 3. Install the hardware, when the tank is delivered.

Here's a block diagram of the new system.

__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

Last edited by Xringer; 08-20-12 at 05:56 PM.. Reason: Adding picture
Xringer is offline   Reply With Quote
The Following 2 Users Say Thank You to Xringer For This Useful Post:
FortyTwo (07-01-12), Ryland (06-29-12)
Old 06-29-12, 01:04 AM   #2
Vlad
Apprentice EcoRenovator
 
Join Date: Aug 2010
Location: Windsor ON Canada
Posts: 229
Thanks: 4
Thanked 30 Times in 22 Posts
Default

I don't really get this concept.

You use oil or gas to heat air inside your house and after you take this heat and steal it for water heating????

In warm climate yes it makes sense because this is your "free" AC. But when you heat your house I just don't get it.

For this reason I am going to use ground loop (closed water loop) as a heat source and I will build water to water 2 ton HP.
Vlad is offline   Reply With Quote
Old 06-29-12, 07:59 AM   #3
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default ASHP is the new GSHP

The basement isn't heated. We use 2 Sanyos to heat (and cool) upstairs.

The A7 will dehumidify and cool the basement during the summer months without using much power.
But during the colder parts of the winter, when the basement temperature drops,
it's going to take more power to heat the water.

A GSHP would be nice, but digging a deep ditch in the backyard is pretty much impossible.
I might be able to do it someday when they invent a cheap Laser excavator that can cut soild granite.


I have two ideas that might help out with winter power usage.
I may use one or both of these ideas.

1. Vent warm attic air down to the basement during sunny days.
2. Use backyard PV to power the A7 during good sunlight hours.


The basement slab (and walls) get pretty cold during the winter.

About the same temperature as the water main coming into the house.
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

Last edited by Xringer; 06-29-12 at 08:36 AM.. Reason: photo
Xringer is offline   Reply With Quote
Old 06-29-12, 10:09 AM   #4
MN Renovator
Less usage=Cheaper bills
 
MN Renovator's Avatar
 
Join Date: Nov 2010
Location: Minneapolis, MN
Posts: 939
Thanks: 41
Thanked 116 Times in 90 Posts
Default

"1. Vent warm attic air down to the basement during sunny days."

Adding high dew point hot outside air to your basement is a great way to bring condensation to your basement which brings mold. Not to mention that the moisture will spread to the rest of your house and you'll be living in wet swampy air.
MN Renovator is offline   Reply With Quote
Old 06-29-12, 11:37 AM   #5
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

When it's cold, we do get some humid days (not so much on sunny cold days), but the A7 is also a dehumidifier.

We have metal items stored in the attic, and there doesn't seem to be much of a rust problem up there.
I don't think that pumping attic air to the basement is going to add overwhelming humidity.

The benefits of drying the basement air is one of the things I'm looking forward to.
My machine shop tools are rust magnets..

The fancy new Zenith dehumidifier we got last year is going to find a new home at my daughter's house.
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 06-29-12, 02:17 PM   #6
S-F
You Ain't Me
 
S-F's Avatar
 
Join Date: Nov 2009
Location: Northampton MA
Posts: 662
Thanks: 6
Thanked 71 Times in 58 Posts
Default

The dehumidifier can also be used in the winter. And it probably should be. But they net increase the temperature.

The air in the attic will only be reasonable for a small portion of the year.

All of Vlad's points seem to be reasonable. In the summer the dehumidification and cooling is nice though.

You will have to make a bypass from your attic to the basement. You'd better be sure to insulate and seal that up really well when it's not in use.

I don't think you should do anything to make your house colder in the winter. If you need those two huge monster heat pumps to keep a ranch warm I personally think you have more pressing issues than concern for an extra $1 a day or so on oil to heat your water.

Honestly I see so many issues with this plan that my head is spinning. The amount of work and materials costs will negate any savings you will hope to achieve. We all need hobbies and tinkering with this thing might be a fun project but I wouldn't touch it and I couldn't in good conscience recommend it to anyone.

On a different note, I know a guy who has installed one of these hot water heat pumps and he runs his dryer exhaust through the coil. He coordinates large hot water usage with running the dryer. I have been thinking about using one of these in the summer ONLY! and reverting to gas in the winter.
__________________
My project:


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Chipping away on a daily basis.

Quote:
You know you're an ecorenovator if anything worth insulating is worth superinsulating.
Quote:
S-F: "What happens when you slam the door on a really tight house? Do the basement windows blow out?"

Green Building Guru: "You can't slam the door on a really tight house. You have to work to pull it shut."

Last edited by S-F; 06-29-12 at 02:41 PM..
S-F is offline   Reply With Quote
Old 06-29-12, 05:47 PM   #7
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default A7 unboxing..

I didn't really need a second 24k BTUh for the den. 8K BTUh would have worked fine.
But, I didn't have an 8K BTUh unit sitting unused in my garage..

Maybe taking warm air from the attic is just crazy and I should forget it..
So, I'll look into running the unit off PV. That shouldn't be to hard to do.


The package came in this afternoon and it was in pretty good shape.
The test run was good. Took about 3 minutes before the coil got warm.













__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

Last edited by Xringer; 06-29-12 at 05:50 PM..
Xringer is offline   Reply With Quote
Old 06-29-12, 08:15 PM   #8
Geo NR Gee
Journeyman EcoRenovator
 
Join Date: Jan 2011
Location: Seattle
Posts: 326
Thanks: 109
Thanked 23 Times in 18 Posts
Default

How often do you think the Airtap is going to be running?
Geo NR Gee is offline   Reply With Quote
Old 06-29-12, 09:54 PM   #9
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

That's going to depend on a bunch of factors. I really don't have any idea right now.

If it ran 24 hours a day using 368 watts, that would be 8.832 KWh per day..
At $0.1661 per KWh, that's about $1.47 a day.

So if it runs 8 hours during a summer day? That's 49 cents..

If the average daily run time is between 8 and 16 hours a day, that would be nice.
Cheaper than burning $2 worth of fuel oil..

The cost of home heating oil here in MA has been slowly going up for years.
I don't expect it to get any cheaper over the next 5 or 10 years..


Even if the A7 wasn't useful during cold weather, we might still be
able to cut the amount of oil burned by a good percentage.
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 06-29-12, 10:11 PM   #10
Ryland
Master EcoRenovator
 
Join Date: Mar 2009
Location: Western Wisconsin.
Posts: 913
Thanks: 127
Thanked 82 Times in 71 Posts
Default

I don't have a large enough basement for a heat pump water heater, they want a minimum square footage, otherwise I was thinking about going with something like the Air Tap as well, but as I see it, most of the heat in the basement is coming from the floor and walls, that is why in the summer when it's 90F upstairs the basement isn't that much warmer then when it's 50F upstairs in the winter, so in a round about way a water heater like this is a ground source heat pump and from what I read it should cost you about the same to run as the dehumidifier you currently have running if it runs as much as mine does (about half the time), so it's a win win! dry basement, hot water.

Ryland is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design