I am going to look at/buy forklift tomorrow. - Page 3

pinballlooking · 04-05-22, 05:15 PM

New radiator on its way. Changing it over to an all-aluminum one that I think I matched up. New back tires coming the one tire had a back side wall. I ordered a propane conversion kit.

pinballlooking · 06-01-22, 10:30 AM

I am finally able to get steel delivered by 18 wheeler and unload it with my forklift.

I have new back tires. they were split rims so it was simple for me to replace them. I bought a load range better because I plan on keeping it a long time.

I ordered a fuel pump for a Datsun truck and was able to take the new parts and totally rebuild my old pump works good now. I bought a carb for the same truck and that is working good.
my propane kit came in but need time to install it. For now it is running good on gas.
need to install the new radiator soon.
I bought 60" forks for it. much simpler to unload semi as they put the pallets in the center of the flatbed.

need to fix ebrake but normal brakes work.

pinballlooking · 07-26-22, 10:19 AM

I found a aluminum radiator on amazon. It is close to old one but I had to modify forklift some to make it fit. Forklift radiators are very expensive this one was very reasonably priced. Saved hundreds it was worth the effort.
Added cheap LED $19 lights to the front Wow they are great. Replaced the alternator with a reasonably priced Datsun pickup one direct replacement.

I used the fork lift so much last week. I tool 15,000 pounds of scrap to the scrap yard. They paid me just under 1K for all of it.

I bought a new seat with a seatbelt from eBay big improvement
Changed the oil and new oil filter.

04-05-22, 05:15 PM	#21
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,915 Thanks: 171 Thanked 558 Times in 458 Posts	New radiator on its way. Changing it over to an all-aluminum one that I think I matched up. New back tires coming the one tire had a back side wall. I ordered a propane conversion kit. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

06-01-22, 10:30 AM	#22
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,915 Thanks: 171 Thanked 558 Times in 458 Posts	I am finally able to get steel delivered by 18 wheeler and unload it with my forklift. I have new back tires. they were split rims so it was simple for me to replace them. I bought a load range better because I plan on keeping it a long time. I ordered a fuel pump for a Datsun truck and was able to take the new parts and totally rebuild my old pump works good now. I bought a carb for the same truck and that is working good. my propane kit came in but need time to install it. For now it is running good on gas. need to install the new radiator soon. I bought 60" forks for it. much simpler to unload semi as they put the pallets in the center of the flatbed. need to fix ebrake but normal brakes work. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-26-22, 10:19 AM	#23
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,915 Thanks: 171 Thanked 558 Times in 458 Posts	I found a aluminum radiator on amazon. It is close to old one but I had to modify forklift some to make it fit. Forklift radiators are very expensive this one was very reasonably priced. Saved hundreds it was worth the effort. Added cheap LED $19 lights to the front Wow they are great. Replaced the alternator with a reasonably priced Datsun pickup one direct replacement. I used the fork lift so much last week. I tool 15,000 pounds of scrap to the scrap yard. They paid me just under 1K for all of it. I bought a new seat with a seatbelt from eBay big improvement Changed the oil and new oil filter. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 08-07-22 at 03:30 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode