I bought a used old pallet stacker.

pinballlooking · 08-08-20, 01:24 PM

It is 12v for the lifting it is rated for 2,000 pounds. The guy told me it lifted 65” but it lifts 106”

I bought a deep cycle battery as Sams club the biggest one they had 60 pounds.

In May he was selling it for $450 then he dropped it to $250 I made a offer and he told me someone was coming to buy it.

They did not buy it because it had a leak.

Thursday I message to see if he fixed it he said he did not have the time.
I offered $100 as is for it. He said come and get it.

He told me it was leaking but I tightened the bottom connection and it is not leaking anymore.
I needed to oil things up and I will change the hydraulic fluid but it is working great.

I got some pallet racking to store plate steel on and I plan on using this to load my table.
I can move my table against the wall to gain more room in my shop.
The thing is old it is a Regal but Presto Lifts bought them out in 2002

pinballlooking · 08-09-20, 07:30 PM

I used this to load my table yesterday. It works great you can really have fine control.

I will need to move my table to the center against the wall. It gets so high it could easily hit the garage door.

08-08-20, 01:24 PM	#1
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I bought a used old pallet stacker. It is 12v for the lifting it is rated for 2,000 pounds. The guy told me it lifted 65” but it lifts 106” I bought a deep cycle battery as Sams club the biggest one they had 60 pounds. In May he was selling it for $450 then he dropped it to $250 I made a offer and he told me someone was coming to buy it. They did not buy it because it had a leak. Thursday I message to see if he fixed it he said he did not have the time. I offered $100 as is for it. He said come and get it. He told me it was leaking but I tightened the bottom connection and it is not leaking anymore. I needed to oil things up and I will change the hydraulic fluid but it is working great. I got some pallet racking to store plate steel on and I plan on using this to load my table. I can move my table against the wall to gain more room in my shop. The thing is old it is a Regal but Presto Lifts bought them out in 2002 Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 08-08-20 at 02:26 PM..

08-09-20, 07:30 PM	#2
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I used this to load my table yesterday. It works great you can really have fine control. I will need to move my table to the center against the wall. It gets so high it could easily hit the garage door. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 08-10-20 at 09:53 AM..