EcoRenovator  

Go Back   EcoRenovator > Improvements > Geothermal & Heat Pumps
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 10-18-14, 05:52 PM   #21
vwhead77
Helper EcoRenovator
 
Join Date: Jan 2013
Location: Watkins Glen, NY
Posts: 48
Thanks: 19
Thanked 5 Times in 5 Posts
Cool Different Design - same goal

Click image for larger version

Name:	DSCF5010.jpg
Views:	3461
Size:	269.4 KB
ID:	4723

Click image for larger version

Name:	DSCF5013.jpg
Views:	2929
Size:	199.1 KB
ID:	4724

Click image for larger version

Name:	DSCF5011.jpg
Views:	2992
Size:	220.0 KB
ID:	4725

Ok - second experiment - external coil / discharge from HP - (it's actually a lot more wraps than the internal coil) I managed to wrap 30' of 1/4" copper around a 2" copper pipe. I'm going to insert it into a 4" PVC jacket and fill it with 'fire rated' foam insulation. I'm thinking that a smaller water tube diameter with flow metered by ball valves, will actually give me a decent HX rate. I will have to transition from 2" to 3/4" and use my installed unions (previous pics) to interchange all these gizmos I'm making - (hey I'm semi-retired so I get to play with stuff).

Update : 10/30/14 - INstalled the hp water heater with the coil wrapped around the outside of a 2" pipe/insulated/ and throttled with BVs. Using R209, I have managed a 20 degree differential across the jacket at 4.5 amps. My electric 208V only gets 10 degrees at 12 /14 amps. Definitely gaining ground - my only issue now is the best placement for the outlet side. so far so good

Attached Thumbnails
Click image for larger version

Name:	DSCF5015.jpg
Views:	2825
Size:	282.3 KB
ID:	4736   Click image for larger version

Name:	DSCF5014.jpg
Views:	2806
Size:	250.1 KB
ID:	4737  

Last edited by vwhead77; 10-30-14 at 06:33 PM.. Reason: MOre Pics top add
vwhead77 is offline   Reply With Quote
The Following User Says Thank You to vwhead77 For This Useful Post:
buffalobillpatrick (10-24-14)
Old 10-18-14, 05:56 PM   #22
Mikesolar
Master EcoRenovator
 
Mikesolar's Avatar
 
Join Date: Aug 2012
Location: Toronto
Posts: 958
Thanks: 40
Thanked 158 Times in 150 Posts
Default

Try it out but you won't need to reduce anything. It needs very low resistance and the flow rate is self limiting so no need to restrict it.

BTW, I assume you are a VW nut (?). Check out my avatar. Very few in North America.
Mikesolar is offline   Reply With Quote
The Following User Says Thank You to Mikesolar For This Useful Post:
vwhead77 (10-18-14)
Old 10-18-14, 06:20 PM   #23
vwhead77
Helper EcoRenovator
 
Join Date: Jan 2013
Location: Watkins Glen, NY
Posts: 48
Thanks: 19
Thanked 5 Times in 5 Posts
Default

Thanks for the input - and yes, I have had over 60 VWs in my 55 years- including '72 Ghia 'Vert, '68 Ghia 'Vert, 2X'67 Vans, 2 Synchros, 1 Thing, 1 Fastback, 3 Squarebacks, a few Bugs (oldest was 63) , a few Rabbits, a few Jettas, two diesel pick-ups, a couple of Golfs - etc. - Plus, I used to find them for cheap- fix 'em up, drive them a while and then sell them. I love your Pick up man - had ONE chance to buy one and the guy backed out - I'm jealous
vwhead77 is offline   Reply With Quote
Old 10-18-14, 06:52 PM   #24
jeff5may
Supreme EcoRenovator
 
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,431
Thanks: 431
Thanked 619 Times in 517 Posts
Send a message via Yahoo to jeff5may
Default

Why insulate the center? The copper pipe will have a positive effect on the heat transfer. If you want to restrict the flow, just stuff the pipe with copper or stainless steel pot scrubbers.
jeff5may is offline   Reply With Quote
The Following User Says Thank You to jeff5may For This Useful Post:
vwhead77 (10-18-14)
Old 10-18-14, 06:58 PM   #25
Mikesolar
Master EcoRenovator
 
Mikesolar's Avatar
 
Join Date: Aug 2012
Location: Toronto
Posts: 958
Thanks: 40
Thanked 158 Times in 150 Posts
Default

The pipe needs to be somewhat clear bottom to top. LOW RESISTANCE to natural flow. It won't go fast anyway.

The LT is beast of a truck. Full 8'+ x almost 6' wide bed. It is now getting the a M-TDi from an 02 Jetta in it and then turned into a plug in hybrid.
Mikesolar is offline   Reply With Quote
Old 10-18-14, 06:58 PM   #26
vwhead77
Helper EcoRenovator
 
Join Date: Jan 2013
Location: Watkins Glen, NY
Posts: 48
Thanks: 19
Thanked 5 Times in 5 Posts
Default

I'm insulating the PVC 'jacket'- the HW is still in the 2" pipe with the discharge from the compressor on the outside - but I like the advice about restricting the flow with SS
vwhead77 is offline   Reply With Quote
Old 10-19-14, 12:22 AM   #27
vwhead77
Helper EcoRenovator
 
Join Date: Jan 2013
Location: Watkins Glen, NY
Posts: 48
Thanks: 19
Thanked 5 Times in 5 Posts
Default

Quote:
Originally Posted by Mikesolar View Post
The pipe needs to be somewhat clear bottom to top. LOW RESISTANCE to natural flow. It won't go fast anyway.

The LT is beast of a truck. Full 8'+ x almost 6' wide bed. It is now getting the a M-TDi from an 02 Jetta in it and then turned into a plug in hybrid.
OOhhhhh...I'm really jealous
now .. man .. thas so cool
vwhead77 is offline   Reply With Quote
Old 10-23-14, 12:51 PM   #28
Ron342
Apprentice EcoRenovator
 
Join Date: Feb 2010
Location: Maryland
Posts: 120
Thanks: 26
Thanked 12 Times in 8 Posts
Default Winding and winding

First congratulations!
I'm dying to know how you did such nicely wound coils!
I tried salt filled 3/8 copper around the outside of 1 1/2 copper but had only marginal luck with it.
Nice thing about that 2" copper is that you can run some 3/4 copper up the center of it and connect it to a solar panel if you want to expand this to a 2 heat source system.
Ron342 is offline   Reply With Quote
The Following User Says Thank You to Ron342 For This Useful Post:
vwhead77 (10-30-14)
Old 10-23-14, 01:13 PM   #29
simenad
Lurking Renovator
 
Join Date: Jan 2014
Location: Ottawa
Posts: 11
Thanks: 1
Thanked 0 Times in 0 Posts
Default fridge

what if you tapped into a nearby refrigerator. it would make the fridge much more efficient and direct the heat that would be released into the house into helping heat domestic hot water.
simenad is offline   Reply With Quote
Old 10-23-14, 03:24 PM   #30
theoldwizard1
Apprentice EcoRenovator
 
Join Date: Oct 2014
Location: SE MI
Posts: 105
Thanks: 3
Thanked 12 Times in 9 Posts
Default

Quote:
Originally Posted by stevehull View Post
I am concerned about the material used to plug the holes where the copper tubing comes out. Time will tell.
I agree. I have never had good luck with epoxies long term, especially in warm environments. Perhaps I have not used the correct one.

What you need is a "bulkhead" type fitting. The only kind I have seen are for flared copper (not sure if they are rated for R410A pressure) and usually they "assume" that you have a flat (or at least somewhat flexible) wall that you are going through.

theoldwizard1 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design