Go Back   EcoRenovator > Improvements > Conservation
Advanced Search

Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 03-06-20, 03:23 PM   #1
Lurking Renovator
Join Date: Sep 2015
Location: BC
Posts: 16
Thanks: 2
Thanked 0 Times in 0 Posts
Default Home Heating Cost Calculation

I have a youtube channel and I am making a video explaining how we heat our home. We have a propane boiler heating the floors with a woodstove doing the rest. I am trying to breakdown the btu cost of heating my home. I have used multiple calculators and have come up with 118000 btu to heat my home 34 degrees (-15 to 19C). But it's hard to find out how much it costs to maintain that heat all winter. Is there a way to measure how many btus it takes to maintain a certain temp for the whole winter?

Eg. If the average temp during the winter is -8C and my home stays 20C how do I figure the btus to maintain that for 4 months for example.

(I believe I picked the right sub forum for this.. if not I can redo it in another area...)

Last edited by Mukiwa; 03-06-20 at 04:06 PM..
Mukiwa is offline   Reply With Quote
Old 03-09-20, 02:49 AM   #2
Supreme EcoRenovator
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,424
Thanks: 427
Thanked 618 Times in 516 Posts
Send a message via Yahoo to jeff5may

There are a few ways to get the answers you seek, but simply heating up the space and trying to extrapolate information from the results isn't going to be very accurate. There are a lot of variables to consider, so nailing down the unknowns takes some work.

The most accurate way to do this is to do an energy audit on the house. Your local public utility company may have a free or cheap program in place to do a decent amount of the work for you. If not, it's not super difficult to get a good estimate on your own. The ACCA (air conditioning contractors of America) has standard protocols for calculating everything you need or want to, and publishes a set of manuals for the purpose.

Manual J covers heating and cooling load calculations. Doing a good manual J calculation entails taking measurements of the home, specifying construction materials, and measuring infiltration. There are a lot of computer programs (some free, some not) to make the process a whole lot easier than tabulating and making a math model for the building on paper. In general, the more information the program can digest, the more accurate the answer is. Trash in, trash out, so to speak.

The other ACCA manuals cover system selection, ductwork, balancing, testing, etc. Depending on what type of heating and/or cooling systems you employ, you may or may not be using many of them. If you're truly interested in the performance and quality of what's already installed and operational, or considering altering or upgrading the existing rig, these manuals are invaluable.

Obviously the ACCA wants everyone to buy their approved manuals and software brand new from them. I, however, am not them, so I encourage you to Snoop around on the net. There's a ton of articles that describe what to do and how. A few members have posted threads in the forums here on their own doings.

As always, I wish you good luck and encourage you to chronicle your journey. If you have questions or issues, there are a lot of people here that can help you out. It might take a little time to get answers, but it's usually worth the wait.

jeff5may is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design