Acrylic vs polycarbonate (Lexan) for storm windows

CrankyDoug · 10-18-19, 05:34 PM

I have to make four removable storm windows for the skylight in my house. They are trapezoidal so there will be a lot of waste. I will need two 4X8 sheets.

Acrylic is less expensive than polycarbonate. I'm not concerned about impact damage. The question is which will hold up better under heavy sunlight and semi-regular cleaning.

Acrylic can be polished if it gets scratched. I've never had any luck removing scratches from polycarbonate but then maybe I didn't know what I was doing.

Any recommendations?

10-18-19, 05:34 PM	#1
CrankyDoug Apprentice EcoRenovator Join Date: Jul 2016 Location: Georgia Posts: 100 Thanks: 6 Thanked 14 Times in 11 Posts	Acrylic vs polycarbonate (Lexan) for storm windows I have to make four removable storm windows for the skylight in my house. They are trapezoidal so there will be a lot of waste. I will need two 4X8 sheets. Acrylic is less expensive than polycarbonate. I'm not concerned about impact damage. The question is which will hold up better under heavy sunlight and semi-regular cleaning. Acrylic can be polished if it gets scratched. I've never had any luck removing scratches from polycarbonate but then maybe I didn't know what I was doing. Any recommendations?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode